Published Papers |
No. | Title | Journal | Vol | No | Start Page | End Page | Publication date | DOI | Referee |
1 | Phase transformation and equation of state in Ti–45Al alloy under high pressure | Calphad | 84 | | 102641 | 102641 | Mar. 2024 | https://doi.org/10.1016/j.calphad.2023.1026411 | Refereed |
2 | Abnormal grain growth: A spontaneous activation of competing grain rotation | Advanced Engineering Materials | | | | | Aug. 19, 2023 | https://doi.org/10.1002/adem.2023004701 | Refereed |
3 | Prediction Technique of Surface Characteristics of Fatigue Specimens of Austenitic Stainless Steels by Controlling Finish Processing | Journal of the Society of Materials Science, Japan | 72 | 3 | 154 | 160 | Mar. 15, 2023 | https://doi.org/10.2472/jsms.72.1541 | Refereed |
4 | Heat-induced structural changes in magnesium alloys AZ91 and AZ31 investigated by in situ synchrotron high-energy X-ray diffraction | Journal of Materials Science | 57 | 46 | 21446 | 21459 | Dec. 2022 | https://doi.org/10.1007/s10853-022-07917-y1 | Refereed |
5 | Dependence of surface residual stress on the coefficient of thermal expansion for materials subjected to laser peening without coating | Optics & Laser Technology | 156 | | 108528 | 108528 | Aug. 2022 | https://doi.org/10.1016/j.optlastec.2022.1085281 | Refereed |
6 | In situ neutron diffraction analysis of microstructural evolution-dependent stress response in austenitic stainless steel under cyclic plastic deformation | Materials & Design | | | 110965 | 110965 | Jul. 2022 | https://doi.org/10.1016/j.matdes.2022.1109651 | Refereed |
7 | High Cycle Fatigue Strength and Residual Stress of Punched Fe-Si Steel Sheets | PROCEEDINGS THE 16TH INTERNATIONAL SYMPOSIUM ON ADVANCED SCIENCE AND TECHNOLOGY IN EXPERIMENTAL MECHANICS (ISEM16-2021) | | | 105 | 108 | Nov. 2021 | | Refereed |
8 | In situ diffraction characterization on microstructure evolution in austenitic stainless steel during cyclic plastic deformation and its relation to the mechanical response | Materials Science and Engineering: A | 820 | | 141582 | 141582 | Jul. 2021 | https://doi.org/10.1016/j.msea.2021.1415821 | Refereed |
9 | Effect of laser peening on the mechanical properties of aluminum alloys probed by synchrotron radiation and X-ray free electron laser | Metals | 10 | 11 | 1 | 19 | Nov. 2020 | https://doi.org/10.3390/met101114901 | Refereed |
10 | A mechanism for inducing compressive residual stresses on a surface by laser peening without coating | Metals | 10 | 6 | 1 | 12 | Jun. 2020 | https://doi.org/10.3390/met100608161 | Refereed |
11 | Enhancement of Mechanical Strength of Ceramics by Laser Peening | | 55 | 2 | 78 | 81 | Feb. 2020 | | Refereed |
12 | Practical Measurement of Residual Stresses Using Contour Method | Journal of the Japan Society of Naval Architects and Ocean Engineers | 30 | 0 | 123 | 130 | Dec. 2019 | https://doi.org/10.2534/jjasnaoe.30.1231 | Refereed |
13 | Numerical Investigation on Persistence of Modified Residual Stresses Due to Shot Peening | E-Journal of Advanced Maintenance | 11 | 2 | 79 | 85 | Sep. 2019 | | Refereed |
14 | Feasibility study on application of synchrotron radiation µCT imaging to alloy steel for non-destructive inspection of inclusions | Metals | 9 | 5 | | | May. 2019 | https://doi.org/10.3390/met90505271 | Refereed |
15 | Evaluation of Microstructural Characteristics in Low-Cycle Fatigued Austenitic Stainless Steel Using X-Ray Line Profile Analysis | Materials Science Forum | 941 | | 376 | | Dec. 2018 | https://doi.org/10.4028/www.scientific.net/MSF.941.3761 | Refereed |
16 | Practical Measurement of Residual Stresses Using Contour Method | | | 27 | 301 | 307 | Nov. 2018 | | Refereed |
17 | Lattice parameter evolution during heating of Ti-45Al-7.5Nb-0.25/0.5C alloys under atmospheric and high pressures | Intermetallics | 102 | | 120 | 131 | Nov. 2018 | https://doi.org/10.1016/j.intermet.2018.08.0111 | Refereed |
18 | Prediction of the surface characteristics of shot-peened stainless steels by statistical design of experiments | Transactions of the JSME (in Japanese) | 84 | 865 | 18 | 00150-18-00150 | Sep. 2018 | https://doi.org/10.1299/transjsme.18-001501 | Refereed |
19 | Development of FEM Analysis Method for Prediction of the Long Term Sustainability of Compressive Residual Stress by Shot Peening | | 69 | 6 | 335 | 342 | Jun. 2018 | | Refereed |
20 | High stereographic resolution texture and residual stress evaluation using time-of-flight neutron diffraction | JOURNAL OF APPLIED CRYSTALLOGRAPHY | 51 | | 746 | 760 | Jun. 2018 | https://doi.org/10.1107/S16005767180040041 | Refereed |
21 | Strain Measurement in Ti Layers of CFPR/Ti Laminates by Synchrotron X-ray Diffraction | SPring-8/SACLA Research Report | 6 | 1 | 105 | 108 | Jan. 2018 | https://doi.org/10.18957/rr.6.1.1051 | Refereed |
22 | Prediction method of improved residual stress distribution by shot peening using large scale analysis method | E-Journal of Advanced Maintenance (Internet) | 9 | 3 | NT87_1 | NT87_5 | Nov. 2017 | | Refereed |
23 | Hydrostatic Compression Behavior and High-Pressure Stabilized beta-Phase in gamma-Based Titanium Aluminide Intermetallics(vol 6, 165, 2016) | METALS | 7 | 9 | | | Sep. 2017 | https://doi.org/10.3390/met70903531 | Refereed |
24 | Numerical analysis of residual stress distribution on peening process | WELDING IN THE WORLD | 61 | 3 | 517 | 527 | May. 2017 | https://doi.org/10.1007/s40194-017-0430-41 | Refereed |
25 | Study on shot peened residual stress distribution under cyclic loading by numerical analysis | Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 35 | 2 | 75S | 79S | Apr. 2017 | https://doi.org/10.2207/qjjws.35.75s1 | Refereed |
26 | In-situ residual stress analysis during thermal cycle of a dissimilar weld joint using neutron diffraction and IEFEM | Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 35 | 2 | 112S | 116S | Apr. 2017 | https://doi.org/10.2207/qjjws.35.112s1 | Refereed |
27 | Detection of fatigue damage in stainless steel by EBSD analysis (Applicability of EBSD pattern quality) | Transactions of the JSME (in Japanese) | 83 | 852 | 17 | 00072-17-00072 | 2017 | https://doi.org/10.1299/transjsme.17-000721 | Refereed |
28 | Local Deformation Analysis in Martensite Layer of High-Strength Multilayered Steel Composite Using Synchrotron X-ray Diffraction | Journal of the Society of Materials Science, Japan | 66 | 6 | 420 | 426 | 2017 | https://doi.org/10.2472/jsms.66.4201 | Refereed |
29 | Hydrostatic Compression Behavior and High-Pressure Stabilized beta-Phase in gamma-Based Titanium Aluminide Intermetallics | METALS | 6 | 7 | | | Jul. 2016 | https://doi.org/10.3390/met60701651 | Refereed |
30 | Progress in Bulk Texture Measurement Using Neutron Diffraction | JPS Conference Proceedings | 8 | | 031022 | | Sep. 2015 | https://doi.org/10.7566/JPSCP.8.0310221 | Refereed |
31 | Internal stress distribution for generating closure domains in laser-irradiated Fe-3%Si(110) steels | JOURNAL OF APPLIED PHYSICS | 117 | 17 | | | May. 2015 | https://doi.org/10.1063/1.49161831 | Refereed |
32 | X-Ray Line Profile Study on Shot/Laser-Peened Stainless Steel | Advanced Materials Research | 996 | | 39 | + | Aug. 2014 | https://doi.org/10.4028/www.scientific.net/AMR.996.391 | Refereed |
33 | Workhardening and the microstructural characteristics of shot- and laser-peened austenitic stainless steel | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 608 | | 21 | 24 | Jul. 2014 | https://doi.org/10.1016/j.msea.2014.04.0611 | Refereed |
34 | Effect of Neutron Attenuation on Strain Measurement with Large Gauge Volume | MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION VI | 772 | | 33 | + | 2014 | https://doi.org/10.4028/www.scientific.net/MSF.772.331 | Refereed |
35 | Relaxation behavior of laser-peening residual stress under tensile loading investigated by X-ray and neutron diffraction | Mechanical Engineering Journal | 1 | | SMM0029_1 | SMM0029_4 | 2014 | https://doi.org/10.1299/mej.2014smm00291 | Refereed |
36 | Influence of beam divergence on pseudo-strain induced in time-of-flight neutron diffraction | MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION VII | 777 | | 105 | + | 2014 | https://doi.org/10.4028/www.scientific.net/MSF.777.1051 | Refereed |
37 | X-ray diffraction study on microstructures of shot/laser-peened AISI316 stainless steel | JOURNAL OF NUCLEAR MATERIALS | 443 | 1-3 | 107 | 111 | Nov. 2013 | https://doi.org/10.1016/j.jnucmat.2013.07.0101 | Refereed |
38 | Effects of gauge volume on pseudo-strain induced in strain measurement using time-of-flight neutron diffraction | NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT | 715 | | 28 | 38 | Jul. 2013 | https://doi.org/10.1016/j.nima.2013.03.0311 | Refereed |
39 | Effects of laser peening on rotating bending fatigue properties of Ti-6A1-4V titanium alloy | Zairyo/Journal of the Society of Materials Science, Japan | 62 | 5 | 297 | 304 | May. 2013 | https://doi.org/10.2472/jsms.62.2971 | Refereed |
40 | Evaluation on double-wall-tube residual stress distribution of sodium-heated steam generator by neutron diffraction and numerical analysis | International Congress on Advances in Nuclear Power Plants 2012, ICAPP 2012 | 1 | | 621 | 630 | Nov. 19, 2012 | | Refereed |
41 | Establishment and Optimization of Angle Dispersive Neutron Diffraction Bulk Texture Measurement Environments | MATERIALS TRANSACTIONS | 53 | 11 | 1831 | 1836 | Nov. 2012 | https://doi.org/10.2320/matertrans.MA2012031 | Refereed |
42 | Discussion on accuracy of weld residual stress measurement by neutron diffraction - Influence of strain free reference | Zairyo/Journal of the Society of Materials Science, Japan | 61 | 7 | 604 | 611 | Jul. 2012 | https://doi.org/10.2472/jsms.61.6041 | Refereed |
43 | Stress partitioning behavior of multilayered steels during tensile deformation measured by in situ neutron diffraction | SCRIPTA MATERIALIA | 66 | 3-4 | 139 | 142 | Feb. 2012 | https://doi.org/10.1016/j.scriptamat.2011.10.0181 | Refereed |
44 | EVALUATION OF THE SURFACE LAYER AFTER HIGH-SPEED MILLING | PROGRESS OF MACHINING TECHNOLOGY | | | 121 | + | 2012 | | Refereed |
45 | Critical Condition for Hydrogen Induced Cold Cracking of 980MPa Class Weld Metal | 溶接学会論文集 : quarterly journal of the Japan Welding Society | 29 | 3 | 218 | 224 | Dec. 31, 2011 | https://doi.org/10.2207/qjjws.29.2181 | Refereed |
46 | Relaxation behaviour of laser peening residual stress due to mechanical loading on aluminum alloy | Zairyo/Journal of the Society of Materials Science, Japan | 60 | 7 | 617 | 623 | Jul. 2011 | https://doi.org/10.2472/jsms.60.6171 | Refereed |
47 | Stability of residual stress induced by laser peening under cyclic mechanical loading | International Journal of Structural Integrity | 2 | 1 | 42 | 50 | 2011 | https://doi.org/10.1108/175798611111086081 | Refereed |
48 | S0305-1-4 Effects of surface polish on fatigue property of LPwC treated Ti-6Al-4V alloy | The proceedings of the JSME annual meeting | 2010 | | 125 | 126 | 2010 | https://doi.org/10.1299/jsmemecjo.2010.1.0_1251 | |
49 | Investigation of propagation and interference behavior of surface fatigue cracks under rotating bending fatigue by μCT technique with synchrotron radiation | Zairyo/Journal of the Society of Materials Science, Japan | 58 | 12 | 975 | 981 | Dec. 2009 | https://doi.org/10.2472/jsms.58.9751 | Refereed |
50 | S0302-3-4 Investigation of Propagation and Interference Behavior of Surface Fatigue Cracks by μCT with Synchrotron Radiation | The proceedings of the JSME annual meeting | 2009 | | 157 | 158 | 2009 | https://doi.org/10.1299/jsmemecjo.2009.1.0_1571 | |
51 | Nondestructive evaluation of laser-peened materials by high-energy synchrotron radiation | 放射光 | 21 | 5 | 270 | 278 | Sep. 30, 2008 | | Not refereed |
52 | The effect of static and fatigue loading on residual stress induced by laser peening | Zairyo/Journal of the Society of Materials Science, Japan | 57 | 7 | 648 | 653 | Jul. 2008 | https://doi.org/10.2472/jsms.57.6481 | Refereed |
53 | Advanced x-ray stress analysis method for a single crystal using different diffraction plane families | APPLIED PHYSICS LETTERS | 92 | 23 | | | Jun. 2008 | https://doi.org/10.1063/1.29120301 | Refereed |
54 | Imaging of fatigue cracks in aluminum alloy by micro computed tomography with synchrotron radiation | Zairyo/Journal of the Society of Materials Science, Japan | 57 | 4 | 395 | 400 | Apr. 2008 | https://doi.org/10.2472/jsms.57.3951 | Refereed |
55 | State of the Art X-ray Diffraction Methods for Measuring Stress State in a Single Crystal | TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, VOL 33, NO 2 | 33 | 2 | 381 | 384 | 2008 | | Refereed |
56 | Investigation of Fatigue Crack Behavior with Synchrotron Radiation on AC4CH Casting Aluminum Alloy | JSMME | 2 | 8 | 1104 | 1113 | 2008 | https://doi.org/10.1299/jmmp.2.11041 | |
57 | 1049 Investigation of Fatigue Crack Coalescence Behavior on A7050 Aluminum Alloy with Synchrotron Radiation | The proceedings of the JSME annual meeting | 2008 | | 187 | 188 | 2008 | https://doi.org/10.1299/jsmemecjo.2008.6.0_1871 | |
58 | Retardation of fatigue crack growth on AC4CH cast aluminum alloy by laser peening | Zairyo/Journal of the Society of Materials Science, Japan | 56 | 12 | 1133 | 1138 | Dec. 2007 | https://doi.org/10.2472/jsms.56.11331 | Refereed |
59 | Measurement of Residual Stress Induced by Laser Irradiation on Grain Oriented Silicon Steel Using X-Ray Diffraction | journal of the Japan Society for Testing Materials | 56 | 7 | 609 | 614 | 2007 | https://doi.org/10.2472/jsms.56.6091 | Refereed |
60 | Non-destructive measurement of residual stress depth profile in laser-peened steel at SPring-8 | SYNCHROTRON RADIATION INSTRUMENTATION, PTS 1 AND 2 | 879 | | 1577 | + | 2007 | https://doi.org/10.1063/1.24363671 | Refereed |
61 | Effects of laser peening on fatigue crack behaviors in pre-cracked cast aluminum alloy | MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2 | 345-346 | | 255 | + | 2007 | https://doi.org/10.4028/www.scientific.net/KEM.345-346.2551 | Refereed |
62 | Enhancement of surface property by low-energy laser peening without protective coating | MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2 | 345-346 | | 1589 | + | 2007 | | Refereed |
63 | Measurement of residual stress on a unidirectional solidified Al2O3/YAG eutectic composite using synchrotron and neutron diffraction | Journal of Neutron Research | 15 | 2 | 105 | 112 | 2007 | https://doi.org/10.1080/102381607013724711 | Refereed |
64 | Laser Peening without Coating as a Surface Enhancement Technology | JOURNAL OF LASER MICRO NANOENGINEERING | 1 | 3 | 161 | 166 | Dec. 2006 | https://doi.org/10.2961/jlmn.2006.03.00021 | Refereed |
65 | Development of stress analyzer using whole back reflection ring | Zairyo/Journal of the Society of Materials Science, Japan | 55 | 12 | 1139 | 1145 | Dec. 2006 | https://doi.org/10.2472/jsms.55.11391 | Refereed |
66 | Experimental study on compressive residual stress evolution by pulse laser irradiation | Zairyo/Journal of the Society of Materials Science, Japan | 55 | 7 | 641 | 646 | Jul. 2006 | https://doi.org/10.2472/jsms.55.6411 | Refereed |
67 | Shakedown during fatigue of residual stresses introduced by different mechanical surface treatments | American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP | 2006 | | | | 2006 | https://doi.org/10.1115/PVP2006-ICPVT-11-936971 | Refereed |
68 | 530 Residual Stress Evaluation of Laser-Peened Tubing by Neutron Diffraction | Proceedings of the 1992 Annual Meeting of JSME/MMD | 2006 | | 317 | 318 | 2006 | https://doi.org/10.1299/jsmezairiki.2006.0_3171 | |
69 | 529 Generation of Intergranular Strain on Laser Peened Surface | Proceedings of the 1992 Annual Meeting of JSME/MMD | 2006 | | 315 | 316 | 2006 | https://doi.org/10.1299/jsmezairiki.2006.0_3151 | |
70 | 3549 Effect of laser peening treatment on fatigue property in pre-cracked AC4CH | The proceedings of the JSME annual meeting | 2006 | | 713 | 714 | 2006 | https://doi.org/10.1299/jsmemecjo.2006.1.0_7131 | |
71 | P23 Generalization of X-ray stress analysis method for single crystals with unknown stress-free lattice parameter | Proceedings of the 1992 Annual Meeting of JSME/MMD | 2006 | | 565 | 566 | 2006 | https://doi.org/10.1299/jsmezairiki.2006.0_5651 | |
72 | X-ray residual stress measurements on plasma sprayed molybdenum coatings | High Performance Structures and Materials III | 85 | | 351 | 357 | 2006 | | Refereed |
73 | Design of engineering diffractometer at J-PARC | RESIDUAL STRESSES VII | 524-525 | | 199 | 204 | 2006 | https://doi.org/10.4028/www.scientific.net/MSF.524-525.1991 | Refereed |
74 | Dynamic analysis of residual stress introduced by laser peening | RESIDUAL STRESSES VII | 524-525 | | 135 | 140 | 2006 | https://doi.org/10.4028/www.scientific.net/MSF.524-525.1351 | Refereed |
75 | Enhancement of surface properties by laser peening without coating | American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP | 2006 | | | | 2006 | https://doi.org/10.1115/PVP2006-ICPVT-11-933031 | Refereed |
76 | Strengthening of Si3N4 ceramics by laser peening | RESIDUAL STRESSES VII | 524-525 | | 141 | 146 | 2006 | https://doi.org/10.4028/www.scientific.net/MSF.524-525.1411 | Refereed |
77 | Compressive residual stress generation process by laser peening without pre-coating | WIT Transactions on the Built Environment | 85 | | 359 | 368 | 2006 | https://doi.org/10.2495/HPSM060351 | Refereed |
78 | X-ray residual stress measurements on plasma sprayed molybdenum coatings | WIT Transactions on the Built Environment | 85 | | 351 | 357 | 2006 | https://doi.org/10.2495/HPSM060341 | Refereed |
79 | X-ray residual stress measurement on weld metal of nickel based alloy | Zairyo/Journal of the Society of Materials Science, Japan | 54 | 7 | 710 | 716 | Jul. 2005 | https://doi.org/10.2472/jsms.54.7101 | Refereed |
80 | Effects of laser irradiation on iron loss reduction for Fe-3%Si grain-oriented silicon steel | ACTA MATERIALIA | 53 | 4 | 939 | 945 | Feb. 2005 | https://doi.org/10.1016/j.actamat.2004.10.0401 | Refereed |
81 | Compressive residual stress evolution process by laser peening | RESIDUAL STRESSES VII, PROCEEDINGS | 490-491 | | 370 | 375 | 2005 | https://doi.org/10.4028/www.scientific.net/MSF.490-491.3701 | Refereed |
82 | X-ray stress measurement using whole back diffraction ring | RESIDUAL STRESSES VII, PROCEEDINGS | 490-491 | | 137 | 142 | 2005 | | Refereed |
83 | Stress evaluation by diffraction using neutron and synchrotron radiation II : Residual stress measurements on thin films and microscopic area using synchrotron radiation | Zairyo/Journal of the Society of Materials Science, Japan | 54 | 6 | 642 | 647 | 2005 | https://doi.org/10.2472/jsms.54.6421 | Not refereed |
84 | Residual Stress Distribution in Grain-oriented Silicon Steel | Adv. X-ray Analysis | 47 | 1 | 402 | 409 | 2004 | | Refereed |
85 | Effects of residual stress on critical strain for macroscopic crack formation on thermal spray coatings | Zairyo/Journal of the Society of Materials Science, Japan | 53 | 7 | 740 | 745 | 2004 | https://doi.org/10.2472/jsms.53.7401 | Refereed |
86 | Mechanism of Residual Stress Introduction by Pulsed-laser (2) : Residual Stress Measurement on and around Laser-irradiated Spot by Synchrotron Radiation | The proceedings of the JSME annual meeting | 2004 | | 261 | 262 | 2004 | https://doi.org/10.1299/jsmemecjo.2004.1.0_2611 | |
87 | Mechanism on residual stress improvement by laser peening | Proceedings of the 1992 Annual Meeting of JSME/MMD | 2004 | | 35 | 36 | 2004 | https://doi.org/10.1299/jsmezairiki.2004.0_351 | |
88 | Mechanism of Residual Stress Introduction by Pulsed-laser (1) : Finite element simulation of laser-induced shock wave propagation | The proceedings of the JSME annual meeting | 2004 | | 259 | 260 | 2004 | https://doi.org/10.1299/jsmemecjo.2004.1.0_2591 | |
89 | X-ray stress measurement method for single crystal with unknown stress-free lattice parameter | JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS | 42 | 5A | 2876 | 2880 | May. 2003 | https://doi.org/10.1143/JJAP.42.28761 | Refereed |
90 | Evaluation of Phase Stresses of Al2O3/YAG Binary MGC by Synchrotron Radiation - Residual Stress States and Stress Behavior of YAG Phase | Zairyo/Journal of the Society of Materials Science, Japan | 52 | 7 | 770 | 775 | 2003 | https://doi.org/10.2472/jsms.52.7701 | Refereed |
91 | Residual Stress Measurements on CFRP Using Synchrotron Radiation | The proceedings of the JSME annual meeting | 2003 | | 245 | 246 | 2003 | https://doi.org/10.1299/jsmemecjo.2003.1.0_2451 | |
92 | Effect of Residual Stress Induced by Laser Irradiation on Magnetic Domain Refinement of Grain-oriented Silicon Steel | | CDROM | | OS04W0201 | | 2003 | | Not refereed |
93 | Stress Evaluation on Aluminum Wiring in MEMS Using Synchrotron Radiation | The proceedings of the JSME annual meeting | 2003 | | 243 | 244 | 2003 | https://doi.org/10.1299/jsmemecjo.2003.1.0_2431 | |
94 | Mechanism of magnetic domain refinement on grain-oriented silicon steel by laser irradiation | MATERIALS SCIENCE RESEARCH INTERNATIONAL | 8 | 4 | 207 | 212 | Dec. 2002 | https://doi.org/10.2472/jsms.51.12Appendix_2071 | Refereed |
95 | Mechanism of Magnetic Domain Refinement on Grain-Oriented Silicon Steel by Laser Irradiation(Special Issue on X-Ray Study on Deformation and Fracture of Solid) | Journal of the Society of Materials Science, Japan | 51 | 7 | 730 | 735 | Jul. 15, 2002 | https://doi.org/10.2472/jsms.51.7301 | Refereed |
96 | Residual stress measurements of laser peened steels by using synchrotron radiation | ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES | 404-7 | | 83 | 88 | 2002 | https://doi.org/10.4028/www.scientific.net/MSF.404-407.831 | Refereed |
97 | Analysis of depth profiles of residual stress using synchrotron radiation | ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES | 404-7 | | 293 | 298 | 2002 | | Refereed |
98 | Measurement of Steep Stress Gradient Using Synchrotron Radiation | | Special Technical Publication-1, pp. 386-389 | 1 | 386 | 39 | May. 2001 | | Refereed |
99 | Stress Measurement of Single Crystal Using Synchrotron Radiation | Materials Science Research International | Special Technical Publication-1, pp. 382-385 | 1 | 382 | 385 | May. 2001 | | Refereed |
100 | X-ray stress measurements of single crystal in local area using synchrotron radiation | Zairyo/Journal of the Society of Materials Science, Japan | 50 | 7 | 783 | 789 | 2001 | https://doi.org/10.2472/jsms.50.7831 | Refereed |
101 | Elastic constants of alumina and silicon nitride measured by using synchrotron radiation source | Zairyo/Journal of the Society of Materials Science, Japan | 50 | 7 | 690 | 694 | 2001 | https://doi.org/10.2472/jsms.50.6901 | Refereed |
102 | X-ray stress measurement of Single Crystal | | Special Technical Publication-1, pp. 291-294 | 1 | 291 | 294 | 2001 | | Refereed |
103 | Micro and Macroscopic Approaches to Residual Stress Generation Mechanism of Thermal Spray Coatings | Proceedings of the International Thermal Spray Conference | | | 391 | 397 | Dec. 1, 2000 | | Refereed |
104 | X-ray stress measurement of silicon single crystal | MATERIALS SCIENCE RESEARCH INTERNATIONAL | 6 | 4 | 255 | 262 | Dec. 2000 | https://doi.org/10.2472/jsms.49.12Appendix_2551 | Refereed |
105 | X-ray fractography using synchrotron radiation - Residual stress distribution just beneath fatigue fracture surface | MATERIALS SCIENCE RESEARCH INTERNATIONAL | 6 | 4 | 269 | 274 | Dec. 2000 | | Refereed |
106 | Fatigue crack growth behaviour and X-ray fractography on high manganese austenitic cast steel | Zairyo/Journal of the Society of Materials Science, Japan | 49 | 7 | 722 | 728 | Jul. 1, 2000 | https://doi.org/10.2472/jsms.49.7221 | Refereed |
107 | X-ray stress measurement of composite material using Synchrotron radiation | Zairyo/Journal of the Society of Materials Science, Japan | 49 | 7 | 729 | 734 | 2000 | https://doi.org/10.2472/jsms.49.7291 | Refereed |
108 | X-ray stress measurement of silicon single crystal | Zairyo/Journal of the Society of Materials Science, Japan | 49 | 5 | 534 | 540 | 2000 | https://doi.org/10.2472/jsms.49.5341 | Refereed |
109 | X-ray fractography by using synchrotron radiation source - Residual stress distribution just beneath fatigue fracture surface - | Zairyo/Journal of the Society of Materials Science, Japan | 49 | 7 | 748 | 753 | 2000 | https://doi.org/10.2472/jsms.49.7481 | Refereed |
110 | Local Stress Measurements of Silicon Single Crystal by Synchrotron Radiation | Proceedings of the 1992 Annual Meeting of JSME/MMD | 2000 | | 283 | 284 | 2000 | https://doi.org/10.1299/jsmezairiki.2000.0_2831 | |
111 | Residual Principal Stresses and Crack Propagation Direction on Fatigue Fractured Surface(Special Issue on Fatigue) | Journal of the Society of Materials Science, Japan | 48 | 10 | 1118 | 1123 | Oct. 15, 1999 | https://doi.org/10.2472/jsms.48.11181 | Refereed |
112 | X-Ray fractography on fatigue fractured surfaces of Ti-6Al4V alloy | Zairyo/Journal of the Society of Materials Science, Japan | 48 | 6 | 616 | 622 | 1999 | https://doi.org/10.2472/jsms.48.6161 | Refereed |
113 | X-ray fractography on rotating bending fatigue fractured surfaces | Zairyo/Journal of the Society of Materials Science, Japan | 47 | 11 | 1164 | 1169 | 1998 | https://doi.org/10.2472/jsms.47.11641 | Refereed |
114 | In-situ observation and AE analysis of microscopic fracture process of thermal spray coatings | THERMAL SPRAY, VOLS 1 AND 2 | 1 | | 837 | 842 | 1998 | | Refereed |
115 | X-ray Fractography on Fatigue Fractured Surface of Solution and Aging Treated Ti-6Al-4V Alloy | Transactions of the Japan Society of Mechanical Engineers Series B | 63 | 615 | 2387 | 2392 | Nov. 25, 1997 | https://doi.org/10.1299/kikaia.63.23871 | Refereed |
116 | X-ray fractography on fatigue fracture surface of high manganese austenitic steel | Zairyo/Journal of the Society of Materials Science, Japan | 46 | 7 | 732 | 737 | 1997 | https://doi.org/10.2472/jsms.46.7321 | Refereed |
117 | X-ray fractography on fatigue fracture surface formed by crack propagation in initial tensile residual stress field | Zairyo/Journal of the Society of Materials Science, Japan | 45 | 7 | 746 | 751 | 1996 | https://doi.org/10.2472/jsms.45.7461 | Refereed |
118 | Internal Stresses in Thermal Spray Coatings and Its Generation Mechanism | 溶射 : journal of Japan Thermal Spraying Society | 32 | 3 | 130 | 136 | Oct. 31, 1995 | | Refereed |
119 | Influence of Ground Layer on Proof Testing Effect in Sintered Silicon Nitride | Journal of the Society of Materials Science, Japan | 44 | 505 | 1279 | 1285 | Oct. 1995 | https://doi.org/10.2472/jsms.44.12791 | Refereed |
120 | Quantitative Analysis by X-Ray Fractography of Fatigue Fractured Surface under Variable Amplitude Loading | Journal of the Society of Materials Science, Japan | 43 | 495 | 1584 | 1590 | 1994 | https://doi.org/10.2472/jsms.43.15841 | Refereed |
121 | MACRO-STRESS AND MICRO-STRESS IN PLASMA SPRAY COATINGS AND ITS STRESS VERSUS STRAIN BEHAVIOR | 1994 THERMAL SPRAY INDUSTRIAL APPLICATIONS | | | 693 | 697 | 1994 | | Refereed |
122 | DEFORMATION AND FRACTURE ANALYSIS OF THERMAL SPRAY COATINGS BY AE METHOD AND SHEAR TEST UNDER SEM OBSERVATION | 1994 THERMAL SPRAY INDUSTRIAL APPLICATIONS | | | 687 | 691 | 1994 | | Refereed |
123 | FATIGUE-CRACK PROPAGATION BEHAVIOR OF TI-6AL-4V ALLOY | FATIGUE 93, VOLS 1-3 | | | 1575 | 1580 | 1993 | | Refereed |
124 | Effect of Tempering Temperature on Estimation Curve of ifmax or ΔKeff for X-Ray Fractography | Journal of the Society of Materials Science, Japan | 42 | 477 | 613 | 619 | 1993 | https://doi.org/10.2472/jsms.42.6131 | Refereed |
125 | Effect of Stress Level of Gust Cycles on Fatigue Crack Propagation Behavior (Acceleration and Retardation of Crack Propagation Under Simplified Flight Simulation Loading) | Journal of the Society of Materials Science, Japan | 41 | 469 | 1492 | 1498 | 1992 | https://doi.org/10.2472/jsms.41.14921 | Refereed |
126 | A MODEL FOR RESIDUAL-STRESS DISTRIBUTION IN X-RAY FRACTOGRAPHY | RESIDUAL STRESSES - III : SCIENCE AND TECHNOLOGY, VOLS 1 AND 2 | | | 1421 | 1428 | 1992 | | Refereed |
127 | A Residual Stress Model for X-Ray Fractography on the Fatigue Fractured Surface | Zairyo/Journal of the Society of Materials Science, Japan | 40 | 454 | 804 | 810 | 1991 | https://doi.org/10.2472/jsms.40.8041 | Refereed |
128 | X-ray fractography on the fatigue fractured surface. | Journal of Advanced Science | 3 | 4 | 241 | 244 | 1991 | https://doi.org/10.2978/jsas.3.2411 | Refereed |
MISC |
No. | Title | Journal | Vol | No | Start Page | End Page | Publication date |
1 | Introduction of Compressive Residual Stress into Ti-6Al-4V by Low Energy Laser Peening | X線材料強度に関するシンポジウム講演論文集 | 56th | | | | Jul. 2022 |
2 | Stress Analysis Using Neutron Diffraction on Repeatedly Plastic Deformed Austenitic Stainless Steel | X線材料強度に関するシンポジウム講演論文集 | 56th | | | | 2022 |
3 | Variation of microstructure of austenitic stainless steel applied cyclic plastic strain | 材料とプロセス(CD-ROM) | 34 | 1 | | | 2021 |
4 | Evaluation of Low Cycle Fatigue on Austenitic Stainless Steel using Neutron Diffraction | X線材料強度に関するシンポジウム講演論文集 | 54th | | | | 2020 |
5 | Evaluation of Residual Stress In-Depth Profile of Shot-Peened Stainless Steels:(Comparison between Hole Drilling Method and X-Ray Diffraction Method) | The Proceedings of the Materials and Mechanics Conference | 2019 | 0 | OS1303 | | 2019 |
6 | Quantitative study on multi-shot-peening simulation | Preprints of the National Meeting of JWS | 2018 | 0 | 116 | 117 | 2018 |
7 | バルク状黒鉛のX線応力測定法の検討 | X線材料強度に関するシンポジウム講演論文集 | 51st | | 77‐80 | | 2017 |
8 | Numerical analysis of stress-relaxation behavior during shot-peening | Preprints of the National Meeting of JWS | 2017 | 0 | 366 | 367 | 2017 |
9 | Study on the influence of various loads on residual stress distribution after shot peening | Preprints of the National Meeting of JWS | 2017 | 0 | 122 | 123 | 2017 |
10 | Development of FEM analysis method for prediction of the sustainability of compressive residual stress by shot peening | | 13 | | 29 | 34 | 2017 |
11 | Microstructure of peened stainless steel | The Proceedings of Ibaraki District Conference | 2017 | 0 | 402 | 402 | 2017 |
12 | Consideration of the Detection of Fatigue Damage in Stainless Steel by EBSD Analysis:(Applicability of the Pattern Quality) | The Proceedings of the Materials and Mechanics Conference | 2016 | 0 | OS02 | 32 | 2016 |
13 | Investigation on residual stress behavior on peening process | Preprints of the National Meeting of JWS | 2016 | 0 | 352 | 353 | 2016 |
14 | Prediction Modeling of the Surface Characteristics of Shot Peened Stainless Steel | The Proceedings of the Materials and processing conference | 2016 | 0 | 209 | 209 | 2016 |
15 | Martensite Tensile Deformation and Bulk Texture Evolution in Austenite-Martensite Multilayered Steel by Neutron Diffraction | 材料とプロセス(CD-ROM) | 28 | 2 | ROMBUNNO.319 | | Sep. 1, 2015 |
16 | Nondestructive evaluation and 3-D imaging of impact damage in CFRP/Ti fibre-metal laminates using synchrotron radiation laminography | Procedings of The 14th Japanese-European Symposium on Composite Materials | | | | | Sep. 2015 |
17 | Residual Stress Measurement using Neutron Diffraction | hamon | 25 | 1 | 32 | 38 | 2015 |
18 | 疲労試験その場中性子回折ストロボスコピック測定 | 物構研サイエンスフェスタ要旨集 | 3rd | | 101 | | 2015 |
19 | 29aBC-5 Observation of laser-induced plastic deformation and dynamic precipitation in an aluminum alloy | Meeting abstracts of the Physical Society of Japan | 68 | 1 | 296 | 296 | Mar. 26, 2013 |
20 | 318 Texture Evaluation of Bulk Materials by Angle Dispersive Neutron Diffraction | | 61 | | 299 | 300 | 2012 |
21 | 320 Residual Stress Mapping on Ultrasonic Shot Peened Dissimilar Weld Joint Before- and After- Thermal Loading | | 61 | | 303 | 304 | 2012 |
22 | Nondestructive residual stress measurement inside engineering materials | Journal of Materials Life Society | 23 | 3 | 104 | 107 | Oct. 2011 |
23 | Residual Stress Measurement by Neutron Diffraction | RADIOISOTOPES | 59 | 12 | 741 | 750 | Dec. 15, 2010 |
24 | 504 Current Status of RESA Engineering Diffractometer | | 2010 | | 333 | 335 | Oct. 9, 2010 |
25 | Application of neutron residual stress measurement to engineering components | Hamon | 20 | 1 | 76 | 79 | Jan. 2010 |
26 | 332 Improvement of Fatigue Strength on Aluminum Alloy A2024-T4 by Laser Peening : Consideration of residual stress relaxation | | 59 | | 311 | 312 | 2010 |
27 | New Developments of Materials Evaluation by Diffraction Method III : New Developments of Neutron Stress Measurement:III : New Developments of Neutron Stress Measurement | journal of the Japan Society for Testing Materials | 58 | 12 | 1051 | 1057 | 2009 |
28 | 225 Laser Induced Residual Stress on 3%Si-Fe Single-Crystal | | 58 | | 257 | 258 | 2009 |
29 | 216 Residual stress measurement on single crystal materials of hexagonal lattice | | 58 | | 239 | 240 | 2009 |
30 | 314 Investigation of fatigue crack behavior on A7050 aluminum alloy by μCT technique with synchrotron radiation | | 57 | | 75 | 76 | 2008 |
31 | Nondestructive observation of fatigue crack growth by computed tomography with synchrotron radiation | Proceedings of JSEM | | 8 | 335 | 338 | 2008 |
32 | 517 Investigation of Fatigue Crack Behavior with Synchrotron Radiation on Aluminum Alloy | | 2007 | | 371 | 372 | Oct. 24, 2007 |
33 | OS3-2-4 Non-destructive characterization of laser-peened materials with synchrotron radiation of SPring-8 | Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics | 2007 | 6 | "OS3 | 2-4-1"-"OS3-2-4-7" | Sep. 12, 2007 |
34 | J‐PARCの工学材料回折装置「匠」 | 日本中性子科学会年会講演概要集 | 7th | | 88 | | 2007 |
35 | Experimental Research of Japanese Sword on Residual Stress Distributions | X線材料強度に関するシンポジウム講演論文集 | 42nd | | 98 | 102 | 2007 |
36 | Visualization of fatigue cracks in aluminum alloy by X-ray phase-contrast technique | Proceedings of JSEM | | 7 | 133 | 136 | 2007 |
37 | 321 Enhancement of Fracture Toughness of Silicon Nitride Ceramics by Laser Peening | | 56 | | 259 | 260 | 2007 |
38 | 312 Impartment of compressive residual stress on materials surface by laser peening | Materials and processing conference | 2006 | 14 | 167 | 168 | Nov. 25, 2006 |
39 | 313 Enhancement of fatigue strength of structural materials by laser peening | Materials and processing conference | 2006 | 14 | 169 | 170 | Nov. 25, 2006 |
40 | Stay in Manchester, UK | Journal of the Society of Materials Science, Japan | 55 | 8 | 796 | 797 | Aug. 2006 |
41 | 227 Compressive Residual Stress Generation by Laser Peening on Silicon Nitride Ceramics | | 55 | | 245 | 246 | 2006 |
42 | J‐PARCの新材料解析装置 | 日本中性子科学会年会講演概要集 | 6th | | 59 | | 2006 |
43 | 225 Non-destructive Measurement of Residual Stress Depth Profile on the Top Surface of Laser-peened Material by Synchrotron Radiation | | 55 | | 241 | 242 | 2006 |
44 | 224 Laser Peening of Pipe Inside Wall with Small-Diameter and its Evaluation by Neutron Diffraction | | 55 | | 239 | 240 | 2006 |
45 | 323 Retardation of Fatigue Crack Growth by Laser Peening and Visualization of Fatigue Crack with Micro Tomography (μCT) Technique | | 55 | | 279 | 280 | 2006 |
46 | Relationship between Strain Distribution and Magnetic Domain Refining in Laser-irradiated Fe-3%Si Single Crystal | | 18 | 3 | 478 | 478 | Mar. 1, 2005 |
47 | 511 Non-destructive Measurement of Residual Stress Depth Distribution on Laser-peened Material | | 54 | | 155 | 156 | 2005 |
48 | Stress evaluation by diffraction using neutron and synchrotron radiation II : Residual stress measurements on thin films and microscopic area using synchrotron radiation | Zairyo/Journal of the Society of Materials Science, Japan | 54 | 6 | 642 | 647 | 2005 |
49 | 507 X-Ray Residual Stress Measurement of Atmospheric Plasma Sprayed Molybdenum Coating | | 54 | | 147 | 148 | 2005 |
50 | Effect of Coated Films on Laser-induced Strain Distribution in Fe-3%Si Single Crystal | | 17 | 6 | 1331 | 1331 | Sep. 1, 2004 |
51 | Stress Measurement of Single Crystal Using X-ray Diffraction Technique | Proceedings of the Japan Society for Photoelasticity | 4 | 2 | 93 | 99 | Jun. 25, 2004 |
52 | X-ray Stress Distribution in Laser-Peened Fe-3%Si Single Crystal | | 17 | 3 | 512 | 512 | Mar. 1, 2004 |
53 | Fatigue Properties of Aluminum Wiring in MEMS | Materials and processing conference | 2003 | 11 | 199 | 200 | Oct. 17, 2003 |
54 | OS04W0320 Residual stress analyses in laser single pulse irradiated area using synchrotron radiation | Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics | 2003 | 2 | "OS04W0320 | 1"-"OS04W0320-5" | Sep. 10, 2003 |
55 | Residual Stress Measurements on Cu Thin Films with Various Thicknesses Using Synchrotron Radiation | | CDROM | | - | | 2003 |
56 | Measurement of Stress Distributions in laser-irradiated Fe-3%Si Single Crystal | Adv. X-Ray. Chem. Anal., Japan | 34 | 1 | 143 | 152 | 2003 |
57 | 323 Fatigue Characteristics of Thin Films | Materials and processing conference | 2001 | 9 | 339 | 340 | Nov. 2, 2001 |
58 | 617 Effect of Residual Stress on Bending Strength of Thermal Spray Coatings | Materials and processing conference | 2001 | 9 | 259 | 260 | Nov. 2, 2001 |
59 | Wear Resistance of Mo Coatings-Effect of Spray Distance- | | 67 | | 49 | 50 | Jun. 18, 1998 |
60 | Evaluation of Microcrack Increasing Stress of Molybdenum Thermal Spray Coatings by Acoustic Emission Method | | 67 | | 51 | 52 | Jun. 18, 1998 |
61 | Diagnostics of Molybdenum coatings by using Acoustic Emission Method (Characterization of Micro-Fracture) | | 66 | | 33 | 34 | Oct. 23, 1997 |
62 | Influence of Microstructure on Fatigue Crack Growth Behavior of the Thin Sheet of Titanium Alloy | | 9 | | 235 | 239 | Sep. 24, 1997 |
63 | X-ray Fractography on Fatigue Fracture | | 30 | 1 | 17 | 25 | Mar. 25, 1996 |
64 | AE Properties and Deformation Mechanism of Thermal Spray Coatings | | 62 | | 30 | 31 | Nov. 16, 1995 |