| Published Papers |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date | DOI | Referee |
| 1 | Experimental and numerical investigation of high-flow-rate injection focusing on improved thermal efficiency and output performance in low-pressure direct-injection hydrogen engines | Journal of the Energy Institute | 125 | | 102463 | 102463 | Apr. 2026 | https://doi.org/10.1016/j.joei.2026.1024631 | Refereed |
| 2 | Experimental and numerical investigation of a low-pressure direct-injection hydrogen engine focusing on high thermal efficiency with near-zero emissions | International Journal of Hydrogen Energy | 194 | | 152418 | 152418 | Dec. 2025 | https://doi.org/10.1016/j.ijhydene.2025.1524181 | Refereed |
| 3 | Acoustic emission analysis of seizure transition process between steel journals and aluminum alloy plain bearings | Tribology International | 202 | | 110324 | 110324 | Feb. 2025 | https://doi.org/10.1016/j.triboint.2024.1103241 | |
| 4 | Mesoscale smoothed particle hydrodynamics simulation of seizure and flash temperature for dry friction of elastoplastic solids in a newly developed model | Journal of Computational Science | 82 | | 102325 | 102325 | Oct. 2024 | https://doi.org/10.1016/j.jocs.2024.1023251 | |
| 5 | Analysis of the relationship between near-wall velocity distribution and wall heat flux under diesel spray flame impingement in an RCEM  | International Journal of Engine Research | | | | | Feb. 15, 2024 | https://doi.org/10.1177/146808742312245301 | |
| 6 | Clarification of Fuel and Oil Flow Behavior Around the Piston Rings of Internal Combustion Engines | SAE Technical Paper Series | | | | | Sep. 29, 2023 | https://doi.org/10.4271/2023-32-00471 | |
| 7 | Effect of modified combustion chamber configuration and enhanced squish flow on improving thermal efficiency in jet-plume-controlled direct-injection near-zero emission hydrogen engines | International Journal of Engine Research | 24 | 7 | 2897 | 2907 | Jul. 2023 | https://doi.org/10.1177/146808742211352771 | |
| 8 | The Verification of Engine Analysis Model Accuracy by Measuring Oil Film Pressure in the Main Bearings of a Motorcycle High-Speed Engine Using a Thin-Film Sensor | Lubricants | 10 | 11 | | | Nov. 2022 | https://doi.org/10.3390/lubricants101103141 | |
| 9 | Measurement of Piston Pin-Bore Oil Film Pressure under Engine Operation | Lubricants | 10 | 10 | | | Oct. 2022 | https://doi.org/10.3390/lubricants101002581 | |
| 10 | Effect of high compression ratio on improving thermal efficiency and NOx formation in jet plume controlled direct-injection near-zero emission hydrogen engines | International Journal of Hydrogen Energy | 47 | 73 | 31459 | 31467 | Aug. 26, 2022 | https://doi.org/10.1016/j.ijhydene.2022.07.0471 | Refereed |
| 11 | The effects of DLC-coated journal on improving seizure limit and reducing friction under engine oil lubrication | International Journal of Engine Research | 23 | 8 | 1267 | 1274 | Aug. 2022 | https://doi.org/10.1177/146808742110129341 | Refereed |
| 12 | Observation of Behavior of Post-injected Fuel Film Using Photochromism Visualization Technique | Transactions of the Society of Automotive Engineers of Japan | 53 | 3 | 466 | 471 | Apr. 2022 | https://doi.org/10.11351/jsaeronbun.53.4661 | Refereed |
| 13 | Effect of supercharging on improving thermal efficiency and modifying combustion characteristics in lean-burn direct-injection near-zero-emission hydrogen engines | International Journal of Hydrogen Energy | 47 | 2 | 1319 | 1327 | Jan. 5, 2022 | https://doi.org/10.1016/j.ijhydene.2021.10.0611 | Refereed |
| 14 | Effect of modified combustion chamber configuration and enhanced squish flow on improving thermal efficiency in jet-plume-controlled direct-injection near-zero emission hydrogen engines | International Journal of Engine Research | 24 | 7 | 2897 | 2907 | 2022 | https://doi.org/10.1177/146808742211352771 | |
| 15 | Excellent seizure and friction properties achieved with a combination of an a-c:H:Si dlc-coated journal and an aluminum alloy plain bearing | Coatings | 11 | 9 | | | Sep. 2021 | https://doi.org/10.3390/coatings110910551 | Refereed |
| 16 | Calculation of Oil Film Thickness on Bearing Raceway Grooves by Measuring Raceway Outer Ring Temperature | SAE Technical Papers | | 2021 | | | Apr. 2021 | https://doi.org/10.4271/2021-01-03421 | Refereed |
| 17 | Seizure and friction properties of the DLC coated journal and aluminum alloy bearing | Tribology Online | 15 | 4 | 241 | 250 | Jul. 15, 2020 | https://doi.org/10.2474/trol.15.2411 | Refereed |
| 18 | Analysis of CVT Element Vibration by In-Situ Measurement | SAE Technical Papers | 2020-April | April | | | Apr. 2020 | https://doi.org/10.4271/2020-01-09061 | Refereed |
| 19 | Metal Belt CVT Seizure Monitoring System Using Wear Debris Analysis and Particle Measurement | SAE Technical Papers | 2020-April | April | | | Apr. 2020 | https://doi.org/10.4271/2020-01-09071 | Refereed |
| 20 | Subsurface temperature estimation during traction transmission in the variator of metal V-belt CVTs | Tribology Online | 15 | 1 | 18 | 24 | Jan. 31, 2020 | https://doi.org/10.2474/trol.15.181 | Refereed |
| 21 | Realization of High Thermal Efficiency Near-zero Emissions and Additional Improved Performance by Optimizing Injected Spray Configuration and Injection Timing in Direct Injection Hydrogen Engines | Transactions of the Society of Automotive Engineers of Japan | 51 | 1 | 26 | 31 | Jan. 2020 | https://doi.org/10.11351/jsaeronbun.51.261 | Refereed |
| 22 | Attainment of High Thermal Efficiency and Near-zero Emissions by Optimizing Injected Spray Configuration in Direct Injection Hydrogen Engines | SAE Technical Papers | | December | | | Dec. 19, 2019 | https://doi.org/10.4271/2019-01-23061 | Refereed |
| 23 | Study on heat flux analysis method and accuracy on combustion chamber wall in internal combustion engine using coaxial type thin film temperature sensor | Transactions of the JSME (in Japanese) | 85 | 879 | 19 | 00262 | Nov. 2019 | https://doi.org/10.1299/transjsme.19-002621 | Refereed |
| 24 | A study on sliding surface pressure measurement of piston ring under reciprocating condition using thin-film sensor | Tribology Online | 14 | 4 | 179 | 187 | Nov. 2019 | https://doi.org/10.2474/trol.14.1791 | Refereed |
| 25 | Development of the Simulation Model About Dry Asperity Friction and Wear by SPH Method with Disk-Like Particles | ITC Sendai 2019 | | | | | Sep. 2019 | | |
| 26 | Research on evaluation of hydrogen jet behavior and assessment of cooling loss reduction by measuring local heat flux in direct injection hydrogen engines | Transactions of the JSME (in Japanese) | 85 | 875 | 18 | 00427 | Jul. 2019 | https://doi.org/10.1299/transjsme.18-004271 | Refereed |
| 27 | Simultaneous Attainment of Near-zero Emissions, High Thermal Efficiency and High Output Power by Optimizing Jet Geometry in Direct-injection Hydrogen Engine | WHTC 2019( 8th World Hydrogen Technologies Convention), Tokyo | | | | | Jun. 2019 | | Refereed |
| 28 | Near-zero emissions with high thermal efficiency realized by optimizing jet plume location relative to combustion chamber wall, jet geometry and injection timing in a direct-injection hydrogen engine | International Journal of Hydrogen Energy | 44 | 18 | 9456 | 9465 | Apr. 2019 | https://doi.org/10.1016/j.ijhydene.2019.02.0581 | Refereed |
| 29 | Life estimation of rolling bearings based on the colors on sliding surfaces | SAE Technical Papers | 2019-April | April | | | Apr. 2019 | https://doi.org/10.4271/2019-01-01801 | Refereed |
| 30 | A study of the lubrication under impact loading - Experimental and analytical application to push belt CVTs | Tribology Online | 14 | 2 | 18 | 23 | Apr. 2019 | https://doi.org/10.2474/trol.14.181 | Refereed |
| 31 | A Study on Piston Ring Conformability to Cylinder Bore Influencing on Lubricating Oil Consumption | Journal of Japan Society of Automotive Engineering | 50 | 2 | 229 | 235 | Mar. 2019 | https://doi.org/10.11351/jsaeronbun.50.2291 | Refereed |
| 32 | Measurement of oil film pressure in piston pin-boss by thin-film pressure sensor | Transactions of the Society of Automotive Engineers of Japan | 50 | 2 | 236 | 241 | Mar. 2019 | https://doi.org/10.11351/jsaeronbun.50.2361 | Refereed |
| 33 | Influence of material of coaxial type thin-film temperature sensor on hot junction position and measurement accuracy | Transactions of the JSME (in Japanese) | 85 | 871 | 18 | 00395 | Mar. 2019 | https://doi.org/10.1299/transjsme.18-003951 | Refereed |
| 34 | Realization of Near-zero Emissions with High Thermal Efficiency by Optimizing Jet Location, Geometry and Injection Timing in Direct-injection Hydrogen Engine | GOPE-2019(3rd Int'l Conference on Gas, Oil and Petroleum Engineering ), SanFrancisco | | | | | Feb. 2019 | | Not refereed |
| 35 | Development of Coaxial Type Thin Film Temperature Sensor with Improved Measurement Accuracy Based on Principle of Thermoelectromotive Force | SAE Technical Papers | | | | | Nov. 2018 | https://doi.org/10.4271/2018-32-00321 | Refereed |
| 36 | A Development of Measurement System for Piston Ring Sliding Surface Pressure | SAE Technical Papers | | | | | Nov. 2018 | https://doi.org/10.4271/2018-32-00221 | Refereed |
| 37 | Study on the development of thin-film sensor for measuring instantaneous temperature on wall surface of combustion chamber | Proceedings of 2018 5th International Conference on Business and Industrial Research: Smart Technology for Next Generation of Information, Engineering, Business and Social Science, ICBIR 2018 | | | 252 | 257 | Jun. 20, 2018 | https://doi.org/10.1109/ICBIR.2018.83912021 | Refereed |
| 38 | Crystal structure of the interface formed by thermo-sonic bonding and its effect | 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018 | | | 318 | 326 | May. 2018 | | Refereed |
| 39 | Temperature Prediction of Actual Contact Portion of the Metal Belt CVT | SAE Technical Papers | 2018-April | | | | Apr. 2018 | https://doi.org/10.4271/2018-01-01221 | Refereed |
| 40 | Surface Design and the Seizure Resistance Evaluation of Al Alloy for Automotive Piston | Transactions of the Society of Automotive Engineers of Japan | 49 | 2 | 199 | 204 | Mar. 2018 | https://doi.org/10.11351/jsaeronbun.49.1991 | Refereed |
| 41 | Improvement of thermal efficiency and reduction of NOx emissions by burning a controlled jet plume in high-pressure direct-injection hydrogen engines | International Journal of Hydrogen Energy | 42 | 41 | 26114 | 26122 | Oct. 12, 2017 | https://doi.org/10.1016/j.ijhydene.2017.08.0151 | Refereed |
| 42 | Improvement in Accuracy of Piston Frictional Force Measurement Using Floating Liner Engine | Tribology Online | 12 | 3 | 141 | 146 | Jul. 2017 | https://doi.org/10.2474/trol.12.1411 | Refereed |
| 43 | Research Trend of Friction Loss Reduction in Internal Combustion Engines | Tribology Online | 12 | 3 | 82 | 88 | Jul. 2017 | https://doi.org/10.2474/trol.12.821 | Refereed |
| 44 | Strain Analysis of Belt Element-Pulley Interaction of an Automobile CVT under Actual Vehicle Speed Condition | SAE International Journal of Engines | 10 | 3 | 1313 | 1317 | Mar. 28, 2017 | https://doi.org/10.4271/2017-01-11061 | |
| 45 | Friction reduction effect between piston and cylinder surface treatment using floating liner engine | COMODIA 2017 - 9th International Conference on Modeling and Diagnostics for Advanved Engine Systems | | | | | 2017 | https://doi.org/10.1299/jmsesdm.2017.9.c3131 | |
| 46 | High durability thin-film pressure sensor development for engine sliding surface | COMODIA 2017 - 9th International Conference on Modeling and Diagnostics for Advanved Engine Systems | | | | | 2017 | https://doi.org/10.1299/jmsesdm.2017.9.c3141 | |
| 47 | Local fuel concentration measurement through spark-induced breakdown spectroscopy in a direct-injection hydrogen spark-ignition engine | INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | 41 | 32 | 14283 | 14292 | Aug. 2016 | https://doi.org/10.1016/j.ijhydene.2016.05.2801 | Refereed |
| 48 | Optimization of Fuel Jet Geometry, Injection Timing and Ignition Timing Focusing on Improving Thermal Efficiency in Direct Injection Hydrogen Engines | Transactions of the Society of Automotive Engineers of Japan | 47 | 3 | 705 | 710 | May. 2016 | https://doi.org/10.11351/jsaeronbun.47.7051 | Refereed |
| 49 | In-Situ Measurement and Numerical Solution of Main Journal Bearing Lubrication in Actual Engine Environment | SAE International Journal of Fuels and Lubricants | 9 | 2 | 370 | 373 | Apr. 5, 2016 | https://doi.org/10.4271/2016-01-08941 | |
| 50 | Synthesis of the Core Tricyclic Ring Domain of (-)-Schulzeine B | Journal of Organic Chemistry | 80 | 15 | 7790 | 7796 | Aug. 7, 2015 | https://doi.org/10.1021/acs.joc.5b011731 | |
| 51 | Wear Properties of Car Engine Shaft in Actual Engine Environment | SAE International Journal of Fuels and Lubricants | 8 | 1 | 31 | 34 | Apr. 14, 2015 | https://doi.org/10.4271/2015-01-06861 | |
| 52 | Measurement of Oil Film Pressure on Running Continuously Variable Transmission Pulley Part 1: Measurement Using Micro Data Logger System and Thin-Film Sensor | SAE International Journal of Passenger Cars - Mechanical Systems | 7 | 1 | 307 | 311 | Apr. 1, 2014 | https://doi.org/10.4271/2014-01-17321 | |
| 53 | Development of Dynamic Pressure Measurement Method between Piston and Cover at Lock-up Clutch in Automatic Transmission Using Thin-film Sensor | Transactions of the Society of Automotive Engineers of Japan | 45 | 2 | 258 | 290 | Mar. 2014 | https://doi.org/10.11351/jsaeronbun.45.2851 | Refereed |
| 54 | Measurement of Contact Pressure between Gear Teeth Using a Thin-Film Sensor(Machine Elements, Design and Manufacturing) | TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C | 76 | 766 | 1633 | 1638 | 2010 | https://doi.org/10.1299/kikaic.76.16331 | Refereed |
| 55 | Measurement of Contact Pressure between Two Rollers Using Thin-Film Sensors(Machine Elements, Design and Manufacturing) | TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C | 76 | 761 | 201 | 206 | 2010 | https://doi.org/10.1299/kikaic.76.2011 | Refereed |
| 56 | Measurement of piston pin-boss oil-film pressure in engine operating condition using new thin-film sensor | Review of Automotive Engineering | 29 | 4 | 493 | 500 | 2008 | | |
| 57 | Study on the development of a thin-film sensor for measuring oil-film pressure in engine bearing and piston pin-boss | Tribology Series | 41 | | 391 | 401 | 2003 | https://doi.org/10.1016/s0167-8922(03)80152-91 | |
| 58 | A Study on the Development of a Thin-Film Pressure Sensor | Proceedings of IEEE Sensors | 1 | 2 | 954 | 959 | 2002 | | |
| MISC |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date |
| 1 | Research and Development Trends in Internal Combustion Engines Using Carbon-Neutral Fuels ―Focusing on Tribology Issues― | Journal of Japanese Society of Tribologists | 71 | 3 | | | Mar. 2026 |
| 2 | Recent Trends in Engine Tribology | Journal of Japanese Society of Tribologists | 71 | 2 | | | Jan. 2026 |
| 3 | Effect of Excess Air Ratio and Injection Timing on Piston Surface Temperature in Cylinder Direct Injection Hydrogen Engines by Temperature Measurement Method Using Multipoint Small Data Logger | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 4 | Introduction of research on tribology and reliability issues of hydrogen engines | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2025 | | | | 2025 |
| 5 | Friction Simulation on Wide-Area Interface Considering Friction-Induced Stress Scheme | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2025 | | | | 2025 |
| 6 | Effect of ultra-fine bubbles on friction reduction in internal combustion engines | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2025 | | | | 2025 |
| 7 | Effects of High Injection Rate on Thermal Efficiency in Low-Pressure Direct Injection Hydrogen Engines | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 8 | Effect of Excess Air Ratio and Engine Speed on Instantaneous Heat Flux in Motorcycle Hydrogen Engines | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 9 | Reduction of Engine Bearing Friction with Engine Oils Containing Ultrafine Bubbles-Effect of generation density and oil viscosity- | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 10 | Effect of Engine Oil Containing Ultrafine Bubbles on Reduction of Friction Loss in Piston-Cylinder System-Influence of Cylinder Bore Honing Specifications and Lubricant Viscosity- | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 11 | Changes in Water Content and Elements in Lubricant Due to Differences in Operating Conditions and Cylinder Wall Temperature of a Hydrogen Engine and Their Effects on Friction and Seizure Characteristics of Engine Bearings | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 12 | Effects of changes in water content of lubricant oil due to combustion in hydrogen engines on friction characteristics of piston systems. | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 13 | Effect of Fuel Supply System on Instantaneous Heat Flux at the Cylinder Liner Wall of Motorcycle Hydrogen Engine | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 14 | Comparative Verification of Measured and Numerical Analysis Results in Instantaneous Heat Flux of Motorcycle Hydrogen Engine | 自動車技術会大会学術講演会講演予稿集(Web) | 2025 | | | | 2025 |
| 15 | Effect of Fuel Jet Specifications on Engine Performance in Lowered Injection Pressure in Direct Injection Hydrogen Engines | 自動車技術会大会学術講演会講演予稿集(Web) | 2024 | | | | 2024 |
| 16 | Recent Trends in Engine Tribology | トライボロジスト | 69 | 1 | | | 2024 |
| 17 | Effects of operating conditions and cylinder wall temperature differences on the proportion of condensed water in lubricating oil in premixed hydrogen engine | JSAE Symposium (CD-ROM) | | 6-24 | | | 2024 |
| 18 | Development of Low-Pressure Direct Injection Hydrogen Engine Based on Numerical Analysis of Mixture Formation Characteristics by LES | 自動車技術会大会学術講演会講演予稿集(Web) | 2024 | | | | 2024 |
| 19 | Effects of operating conditions and cylinder wall temperature differences on the proportion of condensed water in lubricating oil in premixed hydrogen engine | 自動車技術会大会学術講演会講演予稿集(Web) | 2024 | | | | 2024 |
| 20 | Effect of Engine Oil Containing Nanobubbles by Ultrafine Pore Method on Reduction of Friction Loss in Piston System-Correlation between the Generation Density of Nanobubbles and Friction Reduction Effect- | 自動車技術会大会学術講演会講演予稿集(Web) | 2024 | | | | 2024 |
| 21 | Effect of Engine Oil Containing Nanobubbles by Ultrafine Pore Method on Reduction of Friction Loss in Piston System | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2024 | | | | 2024 |
| 22 | Measurement of wear debris in oil released during endurance testing of bearings and gears. | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2024 | | | | 2024 |
| 23 | Friction Reduction Effect Due to The Combination of Alcohol-Based Aqueous Solution and DLC Coating | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2024 | | | | 2024 |
| 24 | Large-scale parallel SPH simulation targeting seizure processes at wide-area interfaces: 2 | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2024 | | | | 2024 |
| 25 | Hydrogen Engine Combustion and Potential of tribology Issues | 日本トライボロジー学会トライボロジー会議予稿集(Web) | 2024 | | | | 2024 |
| 26 | Introduction to Plain Bearings | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 68 | 8 | 524 | 526 | Aug. 15, 2023 |
| 27 | Improvement of the friction model of engine bearing using the bearing test rig | | | | | | Mar. 2023 |
| 28 | Effects of Fuel Injection Timing on Blow-by Gas Concentration in Direct Injection Hydrogen Engines on Hydrogen Concentration in Blow-by Gas | JSAE, kanto branch, ICATYE2022 | | | | | Mar. 2023 |
| 29 | Effects of liner support structure on FMEP and friction work in floating liner engine | JSAE, kanto branch, ICATYE2022 | | | | | Mar. 2023 |
| 30 | Low Friction in the EHL Regime of Engine Bearings with DLC-coated journals: Differences in after Sliding Bearing Surface Properties Using AFM | 内燃機関シンポジウム講演論文集(CD-ROM) | 34th | | | | 2023 |
| 31 | Research Trends in Internal Combustion Engines Aimed Further Low Friction Loss | 自動車技術(Web) | 77 | 12 | | | 2023 |
| 32 | Elastic contact simulation using particle method | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2023 | | | | 2023 |
| 33 | Effects of modified combustion chamber configuration on In-Cylinder Pressure Oscillation and Hydrogen Concentration in Blow-by Gas in Direct Injection Hydrogen Engines | 内燃機関シンポジウム講演論文集(CD-ROM) | 34th | | | | 2023 |
| 34 | Potential of Tribology Issues for Hydrogen-Fueled Internal Combustion Engines | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2023 | | | | 2023 |
| 35 | Elucidation of Seizure Phenomenon of Plain Bearings by Measuring AE in Bearing Tester | JSAE Engine Review (Web) | 12 | 7 | | | Dec. 2022 |
| 36 | CFD Analysis of the Effect of Modified Combustion Chamber Configuration on Mixture Formation in Jet-Plume-Controlled Direct-Injection Near-zero Emission | 33nd Internal Combustion Engine Symposium | | | | | Nov. 2022 |
| 37 | Effects of liner support structures on FMEP in floating liner engine | 33nd Internal Combustion Engine Symposium | | | | | Nov. 2022 |
| 38 | Measurement of oil transport around oil control ring and verfication of analysis model | 33nd Internal Combustion Engine Symposium | | | | | Nov. 2022 |
| 39 | Observation of Oil Dilution Factor by Diesel Engine Fuel Using Photochromism Method | 33nd Internal Combustion Engine Symposium | | | | | Nov. 2022 |
| 40 | Observation of Fuel Behavior and Measurement of Oil Dilution Rate around Piston Rings by Post-Injection Using Photochromism Visualization and Direct Sampling Techniques | JSAE, kanto branch, ICATYE2021 | | | | | Mar. 2022 |
| 41 | An Experimental Verification of the Trend and Mechanism of Lubricating Oil Consumption for Engine Operating Conditions and Piston Specifications | JSAE, kanto branch, ICATYE2021 | | | | | Mar. 2022 |
| 42 | Effect of Post-injection Timing and Piston Ring Gap Position on Oil Dilution Rate around Piston Rings in Diesel Engines | JSAE, kanto branch, ICATYE2021 | | | | | Mar. 2022 |
| 43 | Local heat flux distribution measurement on wall surface where diesel spray flame impingement | JSAE, kanto branch, ICATYE2021 | | | | | Mar. 2022 |
| 44 | Performance Evaluation of Direct Injection Hydrogen Engines using ANOVA | JSAE, kanto branch, ICATYE2021 | | | | | Mar. 2022 |
| 45 | Improvement of mesoscale seizure model by SPH method | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2022 | | | | 2022 |
| 46 | Simultaneous Measurement of Emission Particles and Piston Surface Temperature in Direct-Injection Gasoline Engines | 日本機械学会熱工学コンファレンス講演論文集(CD-ROM) | 2022 | | | | 2022 |
| 47 | Oil Film Pressure at Taper Shape of Piston Pin-bore during Engine Operation | 自動車技術会大会学術講演会講演予稿集(Web) | 2022 | | | | 2022 |
| 48 | Study on Dilution of Oil with Diesel Engine Fuel -Oil sampling method and properties of diluted oil- | 32nd Internal Combustion Engine Symposium | 32nd (Web) | | | | Dec. 2021 |
| 49 | Characteristics of In-cylinder Pressure Oscillation by Increased Compression Ratio in Direct Injection Near-Zero Emission Hydrogen Engines | 32nd Internal Combustion Engine Symposium | 32nd (Web) | | | | Dec. 2021 |
| 50 | Effect of DLC coating journal on improving seizure resistance of plain bearings | 32nd Internal Combustion Engine Symposium | 32nd (Web) | | | | Dec. 2021 |
| 51 | Effect of High Compression Ratio on Improving Thermal Efficiency in Direct Injection Near Zero Emission Hydrogen Engines | 32nd Internal Combustion Engine Symposium | 32nd (Web) | | | | Dec. 2021 |
| 52 | Tribo-chemistry for sliding surface of crank journal | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2021 | | | | Oct. 2021 |
| 53 | Effect of interfacial interaction on mesoscale boundary lubrication friction | 日本物理学会講演概要集(CD-ROM) | 76 | 2 | | | Sep. 2021 |
| 54 | Low friction property of DLC coated crank journal under fluid lubrication | 自動車技術会大会学術講演会講演予稿集(Web) | 2021 | | | | May. 2021 |
| 55 | AE wave analysis for seizure phenomena between steel crank journal and aluminum alloy bearing by using bearing tester | Tribology Conference 2021 Spring Tokyo | 2021 | | | | May. 2021 |
| 56 | An approach to elucidate the mechanism of seizure phenomenon between crank journal and bearing | 2021 JSAE Congress (Spring) | 2021 | | | | May. 2021 |
| 57 | Seizure and friction properties in the combination of DLC (a-C:H:Si) coated iournal and aluminum alloy plain bearing by using a bearing tester | Tribology Conference 2021 Spring Tokyo | 2021 | | | | May. 2021 |
| 58 | Engine friction loss reduction research and approach to seizure and oil consumption prediction models | JSAE Engine Review | 11 | 4 | | | Apr. 2021 |
| 59 | Application to a mechanism of the lubricating oil consumption and piston land pressure measurement by optical fiber sensor | JSAE, kanto branch, ICATYE2020 | | | | | Mar. 2021 |
| 60 | 31th Internal Combustion Engine Symposium | JSAE Engine Review | 11 | 2 | | | Mar. 2021 |
| 61 | Effect of Compression Ratio on Thermal Efficiency and NOx Emissions in Direct Injection Hydrogen Engine | JSAE, kanto branch, ICATYE2020 | | | | | Mar. 2021 |
| 62 | Research on grasping the wear state of engine crank journal bearings by AE sensor | JSAE, kanto branch, ICATYE2020 | | | | | Mar. 2021 |
| 63 | Research on In-cylinder Water Injection in Super-Lean Burn Spark Ignition Engine using RCEM | 内燃機関シンポジウム講演論文集(CD-ROM) | 32nd (Web) | | | | 2021 |
| 64 | Direct measurement of heat loss on combustion chamber wall in gas engine with pre-chamber | The 31th Internal Combustion Engine Symposium | | | | | Nov. 2020 |
| 65 | Mesoscale SPH simulration of friction between elastic and plastic bodies with asperities | Tribology Conference 2020 Autumn Beppu | | | | | Nov. 2020 |
| 66 | Study on Improving Thermal Efficiency and Reducing NOx Emissions in High Thermal Efficiency and Near Zero Emission Direct Injection Hydrogen Engines - Findings of Combustion Characteristics Targeting to Realize Zero-NOx Emissions - | 2020 JSAE Congress (Autumn) | 2020 | | | | Oct. 2020 |
| 67 | Study on Improving Thermal Efficiency and Reducing NOx Emissions in High Thermal Efficiency and Near Zero Emission Direct Injection Hydrogen Engines - The Effect of Combustion Chamber Geometry on Thermal Efficiency and NOx Emissions - | 2020 JSAE Congress (Autumn) | 2020 | | | | Oct. 2020 |
| 68 | Simulation modeling of boundary lubricant friction by SPH method | The Proceedings of Mechanical Engineering Congress, Japan | 2020 | | S11306 | | Sep. 2020 |
| 69 | Changes in Industry-Academia Collaborative Research System on Automobile Engine Tribology | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 65 | 6 | 329 | 335 | Jun. 15, 2020 |
| 70 | SPH simulation to reveal mesoscale mechanism of metal asperity friction | Meeting Abstracts of the Physical Society of Japan | 75.1 | | 2098 | 2098 | Mar. 2020 |
| 71 | Effect of Sliding Surface Profile of Piston Rings Shaped by Running-in on Friction Loss of Piston-Cylinder System -Synergy Effect of Dimple Bore and Ring Surface Profile- | The 30th Internal Combustion Engine Symposium | 30th | | | | Dec. 2019 |
| 72 | Model development for interfacial physics with ASPH | Meeting Abstracts of the Physical Society of Japan | 74.1 | | 3165 | 3165 | Mar. 2019 |
| 73 | Recent Trends in Engine Tribology | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 64 | 1 | 9 | 10 | Jan. 15, 2019 |
| 74 | Study of friction boundary on elastic-plastic solid using Disk-like SPH method | The Proceedings of Mechanical Engineering Congress, Japan | 2019 | | J22105 | | 2019 |
| 75 | Research and Development on Utilizing Exhaust Gas Energy and Reducing Mechanical Losses by “Loss Reduction Team” in the SIP’s “Innovative Combustion Technologies” | Journal of the Combustion Society of Japan | 61 | 197 | 213 | 223 | 2019 |
| 76 | Instantaneous Heat Flux Measurement Method Using Thin Film Sensor Technology for Improving Thermal Efficiency of Internal Combustion Engines | Nihon Enerugii Gakkai Kikanshi Enermix | 97 | 4 | 389 | 395 | Jul. 20, 2018 |
| 77 | Instantaneous Surface Temperature Measurement by Coaxial Type Thin-film Temperature Sensor and Derivation of Local Heat Flux Using Measured Values | Journal of The Society of Instrument and Control Engineers | 57 | 5 | 344 | 348 | May. 10, 2018 |
| 78 | Meso-scale tribological SPH simulation including plastic deformation and wear | Meeting Abstracts of the Physical Society of Japan | 73.1 | 1 | 2945 | 2945 | Mar. 23, 2018 |
| 79 | Effect of Super Charging on Improving Thermal Efficiency and Combustion Characteristics in Lean Burn Direct Injection Hydrogen Engines | 内燃機関シンポジウム講演論文集(CD-ROM) | 29th | | | | 2018 |
| 80 | Application of Thin Film Sensing Technique for Surface Pressure Measurement in Piston Ring Sliding Surface | The Proceedings of Mechanical Engineering Congress, Japan | 2018 | | J0710203 | | 2018 |
| 81 | Meso-scaled tribological SPH simulation method of elastic-plastic metal bodies with wear and heat generation | Meeting Abstracts of the Physical Society of Japan | 73.2 | | 2235 | 2235 | 2018 |
| 82 | Development of high precision coaxial type thin film temperature sensor for quantitative measurement of heat flux on combustion chamber wall of the engine | JSAE Engine Review (Web) | 8 | 8 | | | 2018 |
| 83 | Evaluation of Jet Configuration and Cooling Loss from Cylinder Liner by Hydrogen Concentration Measurement in Blow-by Gas in Direct Injection Hydrogen Engine | 内燃機関シンポジウム講演論文集(CD-ROM) | 29th | | | | 2018 |
| 84 | 塑性変形と摩耗を含む粗視化粒子SPHシミュレーション | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2017 | | ROMBUNNO.D20 | | Nov. 15, 2017 |
| 85 | Making Research Paper Meso-scale SPH triborogy simulation using FDPS framework | The Proceedings of Mechanical Engineering Congress, Japan | 2017 | | J0710101 | | 2017 |
| 86 | Running-in effect in the measurement of piston friction using floating liner engine | The Proceedings of Mechanical Engineering Congress, Japan | 2016 | | J0720205 | | 2016 |
| 87 | Research Trend of Friction Loss Reduction in Internal Combustion Engines | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 61 | 2 | 71 | 77 | 2016 |
| 88 | Measurement of instantaneous temperature and heat flux in engine actual condition | The Proceedings of Mechanical Engineering Congress, Japan | 2016 | | J0720103 | | 2016 |
| 89 | Research Trend and Latest Approach for Engine Tribology | JSAE Engine Review (Web) | 6 | 3 | | | 2016 |
| 90 | Designing and Handling of Cars for Racing | Journal of the Society of Mechanical Engineers | 118 | 1165 | 734 | 737 | 2015 |
| 91 | G1100202 Development of thin-film sensor for oil-film condition | The Proceedings of Mechanical Engineering Congress, Japan | 2015 | | _G1100202- | _G1100202- | 2015 |
| 92 | G1100203 Development of thin-film sensor for sliding surface temperature | The Proceedings of Mechanical Engineering Congress, Japan | 2015 | | _G1100203- | _G1100203- | 2015 |
| 93 | Characteristics of Thermal Efficiency under Part Load Operation and the Effect of Rich Mixture Plume Ignition and Combustion on Improving it in High Pressure Direct Injection Hydrogen Engines | Transactions of Society of Automotive Engineers of Japan | 45 | 4 | 657 | 662 | 2014 |
| 94 | Prologue to the Special Issue on “Tribology in Engines for Low Fuel Consumption and Clean Exhaust Gas” | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 57 | 9 | 590 | 590 | Sep. 15, 2012 |
| 95 | G070046 The Mechanism of oil film generation on main journal bearing by using EHL calculation and thin film sensor | The Proceedings of Mechanical Engineering Congress, Japan | 2012 | | _G070046-1 | _G070046-5 | 2012 |
| 96 | Encounter with "Tribology" | | 56 | 4 | 197 | | Apr. 15, 2011 |
| 97 | S116012 Measurement of contact pressure between gear teeth using a thin-film sensor : Measurement of pressure distribution by multi-point pressure sensor with shared lead films | The Proceedings of Mechanical Engineering Congress, Japan | 2011 | | _S116012-1 | _S116012-5 | 2011 |
| 98 | Development of a Measurement Method of Contact Pressure between Gear Teeth Using a Thin-Film Sensor (Measurement of Pressure Distribution by Multi-Point Pressure Sensor with Shared Lead Films) | TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C | 77 | 782 | 3938 | 3950 | 2011 |
| 99 | Strain Distribution Measurement of Piston Compressor Reed Valves in an Automobile Air-conditioner using a Thin-film Sensor | Transactions of Society of Automotive Engineers of Japan | 41 | 4 | 877 | 882 | Jul. 2010 |
| 100 | 3128 Measurement of two-roller rolling contact pressure using thin-film sensor | The proceedings of the JSME annual meeting | 2008.4 | | 53 | 54 | 2008 |
| 101 | Measurement of Piston Pin-boss Oil-film Pressure in Engine Operating Condition using a Thin-film Sensor | Transactions of Society of Automotive Engineers of Japan | 39 | 3 | 3_125 | 3_130 | 2008 |
| 102 | 1412 Characteristics of Oxidation Film on a Metal Substrate Coated by a Sol-gel Method | The proceedings of the JSME annual meeting | 2008.1 | | 231 | 232 | 2008 |
| 103 | Measurement of Piston Skirt Oil-film Pressure under Piston Slap | Transactions of Society of Automotive Engineers of Japan | 39 | 3 | 3_107 | 3_112 | 2008 |
| 104 | 2921 Measurement of Gear Teeth Contact Pressure using Thin-film Sensor | The proceedings of the JSME annual meeting | 2007.4 | | 27 | 28 | 2007 |
| 105 | 20501 Gear Teeth Contact Pressure Measurement by Thin-film Sensor | The Proceedings of Conference of Kanto Branch | 2007.13 | | 425 | 426 | 2007 |
| 106 | Effect of pre-strain on transformation and deformation behavior in Ti-50 at%Ni shape memory alloy | Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals | 69 | 8 | 568 | 574 | Aug. 2005 |
| 107 | Development of a Thin-Film Strain Sensor with Reduced Pressure, Temperature and Transverse Sensitivity. | TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C | 69 | 677 | 258 | 263 | Jan. 2003 |
| 108 | Development of a thin-film pressure sensor for a piston pin boss | The Proceedings of the Materials and processing conference | 2003.11 | | 203 | 204 | 2003 |
| 109 | Measurement of oil-film pressure in engine bearings using a thin-film sensor | LUBRICATION ENGINEERING | 58 | 5 | 10 | 19 | May. 2002 |
| 110 | Measurement of oil-film pressure in engine bearings using a thin-film sensor | TRIBOLOGY TRANSACTIONS | 45 | 1 | 11 | 20 | Jan. 2002 |
| 111 | 322 A Study on the Development of Thin-Film Pressure Sensor | The Proceedings of the Materials and processing conference | 2001.9 | | 137 | 138 | 2001 |
| 112 | Measurement of Oil-film Pressure in Piston Pin Boss by thin-film Pressure Sensor | | 98 | 1 | 561 | | 1998 |
| 113 | Measurement of Oil Film Pressure Using Thin Film Sensor | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 43 | 7 | 75 | | 1998 |
| 114 | Study on the development of thin film sensor for oil film pressure | | 98 | 1 | 559 | | 1998 |
| 115 | Development of a New Thin-Film sensor for the Measurement of Oil Film Pressure in Engine Bearing | MTZ Worldwide | | | 20 | | 1997 |
| 116 | Entwicklung eines Duennschichtsensors zur Messung des Schmirfilmdruckes im Motorgleitlager | MOTOR TECHNISCHE ZEITSCHRIFT | 58 | JahrgangNr.2 | 110 | 116 | 1997 |
| 117 | Study on the measurement of oil-film pressure of engine main bearing by thin-film sensor - The influence of bearing deformation on pressure sensor output under engine operation | JSAE Review | 17 | 3 | 281 | 286 | 1996 |
| 118 | Study on the Measuvement of Oil-Film Pressure of Diesel Engine Main Bearing by means of Thin Film Sensor | The 13th Internal Combustion Engine Symposium, Japan | | | 175 | 180 | 1996 |
| 119 | Study on the Measurement of Oil-film Pressure of Engine Main Bearing by means of New Developed Thin Film Sensor under Engine Operating Conditions | | 26 | 2 | 40 | 45 | 1995 |
| 120 | Development of measuring method for oil film pressure of engine main bearing by thin film sensor | JSAE Review | 16 | 2 | 125 | 130 | 1995 |
| 121 | Study on main bearing load and deformation of multi-cylinder internal combustion engine: Relative inclination between main shaft and bearing | JSAE Review | 16 | 4 | 383 | 386 | 1995 |
| 122 | Study on the Measurement of Oil-film Pressure of Engine Main Bearing by means of New Developed Thin Film Sensor under Engine Operating Conditions. | | 26 | 2 | 40 | 45 | 1995 |
| 123 | A study of main bearing load and deformation in a multi-cylinder internal combustion engine | JSAE Review | 16 | 2 | 188 | 189 | 1995 |
| 124 | Study on the measurement of oil-film pressure of engine main bearing by thin film sensor -The influence of bearing deformation on pressure sensor output. | The 12th Internal Combustion Engine Symposium, JAPAN | | | | | 1995 |
| 125 | A study of Main Bearing Load and Deformation on Multi-Cylinder Internal Combustion Engine. | Proc. JSAE | 943 | | 33 | | 1994 |
| 126 | Study on the Measurement of Oil-film Pressure of Engine Main Bearing by means of New Developed Thin-film Sensor under Engine Operating Conditions. | Lecture Meeting, Society of Automotive Engineers of Japan | 943 | | 97 | 100 | 1994 |
| 127 | A Study of Main Bearing Load and Deformation on Multi-cylinder Internal Combustion Engine -Measurement of Relative Inclination Between Journal and Bearing- | | 944 | | 89 | | 1994 |
| 128 | A study of main journal bearing friction measurement in internal combustion engine. | | 910-17 | B | 370 | | 1991 |
