| Published Papers |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date | DOI | Referee |
| 1 | Effect of work-hardening on the relationship between compressive strength and hardness of quenched medium carbon steel  | Transactions of the JSME (in Japanese) | 90 | 929 | 23 | 00242 | 2024 | https://doi.org/10.1299/transjsme.23-002421 | Refereed |
| 2 | 大きな磁歪を示す鉄合金を搭載したデバイスの振動におけるひずみや磁界の変化 | Tetsu-to-Hagane | | | | | 2024 | https://doi.org/10.2355/tetsutohagane.tetsu-2023-1121 | Refereed |
| 3 | Characterization of Dislocation Structure by Line Profile Analysis Using X-rays and Neutrons | Materia Japan | 62 | 1 | 30 | 34 | Jan. 1, 2023 | https://doi.org/10.2320/materia.62.301 | Not refereed |
| 4 | In situ neutron diffraction analysis of microstructural evolution-dependent stress response in austenitic stainless steel under cyclic plastic deformation | Materials & Design | | | 110965 | 110965 | Jul. 2022 | https://doi.org/10.1016/j.matdes.2022.1109651 | Refereed |
| 5 | A modified pearlite microstructure to overcome the strength-plasticity trade-off of heavily drawn pearlitic wire | Scripta Materialia | 206 | | 114236 | 114236 | Jan. 2022 | https://doi.org/10.1016/j.scriptamat.2021.1142361 | Refereed |
| 6 | In situ diffraction characterization on microstructure evolution in austenitic stainless steel during cyclic plastic deformation and its relation to the mechanical response | Materials Science and Engineering: A | 820 | | 141582 | 141582 | Jul. 2021 | https://doi.org/10.1016/j.msea.2021.1415821 | Refereed |
| 7 | Depth-profiling of residual stress and microstructure for austenitic stainless steel surface treated by cavitation, shot and laser peening | Materials Science and Engineering: A | 813 | | 141037 | 141037 | Mar. 2021 | https://doi.org/10.1016/j.msea.2021.1410371 | Refereed |
| 8 | Variation of tensile strength and elastic limit due to tempering at low temperature on quenched medium carbon steel | Transactions of the JSME (in Japanese) | 87 | 900 | 21 | 00082 | 2021 | https://doi.org/10.1299/transjsme.21-000821 | Refereed |
| 9 | Characterization of Microstructures by X-Ray Diffraction Line Profile Analysis: III: Applications of Line Profile Analysis | Journal of the Society of Materials Science, Japan | 69 | 5 | 421 | 426 | May. 15, 2020 | https://doi.org/10.2472/jsms.69.4211 | Refereed |
| 10 | Characterization of Microstructures by X-Ray Diffraction Line Profile Analysis | Journal of the Society of Materials Science, Japan | 69 | 3 | 277 | 283 | Mar. 15, 2020 | https://doi.org/10.2472/jsms.69.2771 | Refereed |
| 11 | Inhomogeneous strain and recrystallisation of a shot-peened Inconel 625 alloy after annealing | Materials Science and Technology | | | 1 | 8 | Oct. 13, 2019 | https://doi.org/10.1080/02670836.2019.16514751 | Refereed |
| 12 | Tuning strain-induced γ-to-ε martensitic transformation of biomedical Co–Cr–Mo alloys by introducing parent phase lattice defects | Journal of the Mechanical Behavior of Biomedical Materials | 90 | | 523 | 529 | Feb. 2019 | https://doi.org/10.1016/j.jmbbm.2018.10.0381 | Refereed |
| 13 | Evaluation of Microstructural Characteristics in Low-Cycle Fatigued Austenitic Stainless Steel Using X-Ray Line Profile Analysis | Materials Science Forum | 941 | | 376 | | Dec. 2018 | https://doi.org/10.4028/www.scientific.net/MSF.941.3761 | Refereed |
| 14 | Microscopic Residual Stress Distribution Measurement on the Single Dent Surface Assuming Shot Peening | Journal of the Society of Materials Science, Japan | 67 | 3 | 375 | 382 | 2018 | https://doi.org/10.2472/jsms.67.3751 | Refereed |
| 15 | Residual stress variation due to shot peening and thermal ageing on welded Ni-alloy pipe | Transactions of the JSME (in Japanese) | 84 | 863 | 18 | 00139 | 2018 | https://doi.org/10.1299/transjsme.18-001391 | Refereed |
| 16 | Development of On-site Measurement Technique of Retained Austenite Volume Fraction by Compact Neutron Source RANS | Tetsu-to-Hagane | 104 | 3 | 138 | 144 | 2018 | https://doi.org/10.2355/tetsutohagane.tetsu-2017-0801 | Refereed |
| 17 | In-situ Observation of Dislocation Evolution in Ferritic and Austenitic Stainless Steels under Tensile Deformation by Using Neutron Diffraction | Tetsu-to-Hagane | 104 | 4 | 201 | 207 | 2018 | https://doi.org/10.2355/tetsutohagane.tetsu-2017-0821 | Refereed |
| 18 | Prospect for application of compact accelerator-based neutron source to neutron engineering diffraction | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment | 833 | | 61 | 67 | 2016 | https://doi.org/10.1016/j.nima.2016.06.1271 | Refereed |
| 19 | Strengthening of biomedical Ni-free Co–Cr–Mo alloy by multipass “low-strain-per-pass” thermomechanical processing | Acta Biomaterialia | 28 | | 215 | 224 | Dec. 1, 2015 | https://doi.org/10.1016/j.actbio.2015.09.0161 | Refereed |
| 20 | Distribution and anisotropy of dislocations in cold-drawn pearlitic steel wires analyzed using micro-beam X-ray diffraction | ISIJ International | 55 | 7 | 1432 | 1438 | 2015 | https://doi.org/10.2355/isijinternational.55.14321 | Refereed |
| 21 | Characterization of evolution of microscopic stress and strain in high-manganese twinning-induced plasticity steel | ISIJ International | 55 | 10 | 2158 | 2165 | 2015 | https://doi.org/10.2355/isijinternational.ISIJINT-2014-3781 | Refereed |
| 22 | Residual stress analysis of cold-drawn pearlite steel wire using white synchrotron radiation | ISIJ International | 55 | 7 | 1489 | 1495 | 2015 | https://doi.org/10.2355/isijinternational.55.14891 | Refereed |
| 23 | Strengthening of biomedical Ni-free Co-Cr-Mo alloy by multipass "low-strain-per-pass" thermomechanical processing | Acta Biomaterialia | 28 | | 215 | 224 | 2015 | https://doi.org/10.1016/j.actbio.2015.09.0161 | Refereed |
| 24 | Workhardening and the microstructural characteristics of shot- and laser-peened austenitic stainless steel | Materials Science and Engineering A | 608 | | 21 | 24 | 2014 | https://doi.org/10.1016/j.msea.2014.04.0611 | Refereed |
| 25 | X-ray line profile study on shot/laser-peened stainless steel | Advanced Materials Research | 996 | | 39 | 44 | 2014 | https://doi.org/10.4028/www.scientific.net/AMR.996.391 | Refereed |
| 26 | Microstructural features of cold-rolled carbon steel evaluated by X-ray diffraction line profile analysis and their correlation with mechanical properties | ISIJ International | 54 | 1 | 206 | 211 | 2014 | https://doi.org/10.2355/isijinternational.54.2061 | Refereed |
| 27 | X-ray diffraction study on microstructures of shot/laser-peened AISI316 stainless steel | JOURNAL OF NUCLEAR MATERIALS | 443 | 1-3 | 107 | 111 | Nov. 2013 | https://doi.org/10.1016/j.jnucmat.2013.07.0101 | Refereed |
| 28 | Relationship between dislocations and residual stresses in cold-drawn pearlitic steel analyzed by energy-dispersive X-ray diffraction | MATERIALS CHARACTERIZATION | 83 | | 152 | 160 | Sep. 2013 | https://doi.org/10.1016/j.matchar.2013.06.0171 | Refereed |
| 29 | Evaluation of Microstructures and Mechanical Properties of Steel with Tensile Loading Process Using X-Ray Line Profile Analysis | TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 99 | 5 | 366 | 372 | May. 2013 | https://doi.org/10.2355/tetsutohagane.99.3661 | Refereed |
| 30 | Analysis of crack propagation in stealth dicing using stress intensity factor | Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 76 | 764 | 446 | 448 | 2010 | https://doi.org/10.1299/kikaia.76.4461 | Refereed |
| 31 | Analysis of Internal Modified-Layer Formation Mechanism into Silicon Single Crystal with Nanosecond Laser | Transactions of the Japan Society of Mechanical Engineers C | 74 | 738 | 446 | 452 | Feb. 25, 2008 | | |
| 32 | Advanced dicing technology for semiconductor wafer - Stealth dicing | IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING | 20 | 3 | 259 | 265 | Aug. 2007 | https://doi.org/10.1109/TSM.2007.9018491 | Refereed |
| MISC |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date |
| 1 | Characterization of Properties of Functional Iron Alloys Responding to Mechanical Vibration | 材料とプロセス(CD-ROM) | 36 | 1 | | | 2023 |
| 2 | Tensile Test of High-Strength Medium Carbon Steel and Reduction of Elastic Limit | 日本機械学会年次大会講演論文集(CD-ROM) | 2022 | | | | 2022 |
| 3 | Evaluation of Mechanical Properties of Medium Carbon Steel by Dislocation Microstructure Analysis | 日本機械学会年次大会講演論文集(CD-ROM) | 2022 | | | | 2022 |
| 4 | Stress Analysis Using Neutron Diffraction on Repeatedly Plastic Deformed Austenitic Stainless Steel | X線材料強度に関するシンポジウム講演論文集 | 56th | | | | 2022 |
| 5 | Evaluation on Decrease of Elastic Limit on Quenched Medium Carbon Steel | 日本機械学会年次大会講演論文集(CD-ROM) | 2022 | | | | 2022 |
| 6 | Variation of microstructure of austenitic stainless steel applied cyclic plastic strain | 材料とプロセス(CD-ROM) | 34 | 1 | | | 2021 |
| 7 | Analysis of Dislocation density in quenched medium-carbon steels by neutron diffraction | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2020 | | | | 2020 |
| 8 | Development of high-resolution residual stress measurement method via angle-dispersive neutron diffraction using a compact neutron source | 材料とプロセス(CD-ROM) | 33 | 1 | | | 2020 |
| 9 | Evaluation of Low Cycle Fatigue on Austenitic Stainless Steel using Neutron Diffraction | X線材料強度に関するシンポジウム講演論文集 | 54th | | | | 2020 |
| 10 | Tensile Strength of Quenched Steels and Its Utilization | 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM) | 2020 | | | | 2020 |
| 11 | X-rays, laser, X-rays again | Zairyo/Journal of the Society of Materials Science, Japan | 67 | | 828 | | Aug. 1, 2018 |
| 12 | Determination Approach of Dislocation Density and Crystallite Size Using a Convolutional Multiple Whole Profile Software | MATERIALS TRANSACTIONS | 59 | 7 | 1135 | 1141 | Jul. 1, 2018 |
| 13 | ピーニングされたステンレス鋼の微細組織 | 日本機械学会関東支部・精密工学会・茨城大学茨城講演会講演論文集 | 25th (CD-ROM) | | ROMBUNNO.402 | | Aug. 29, 2017 |
| 14 | 弾性異方性の大きい鉄合金における全体的な弾性の評価 | 材料とプロセス(CD-ROM) | 30 | 2 | ROMBUNNO.450 | | Aug. 21, 2017 |
| 15 | 中性子線を用いた複相鋼体積分率評価―小型中性子源RANS― | 材料とプロセス(CD-ROM) | 30 | 1 | ROMBUNNO.311 | | Mar. 31, 2017 |
| 16 | 小型中性子源の産業利用に向けた金属組織測定技術開発 | 光量子工学研究 第5回 理研シンポジウム 平成29年 | | | 211‐212 | | 2017 |
| 17 | 放射光を用いたラインプロファイル解析法による鉄鋼材料転位密度評価 | X線材料強度に関するシンポジウム講演論文集 | 51st | | 101‐104 | | 2017 |
| 18 | バルク状黒鉛のX線応力測定法の検討 | X線材料強度に関するシンポジウム講演論文集 | 51st | | 77‐80 | | 2017 |
| 19 | CMWP法による中性子回折プロファイル解析を用いた応力緩和中における780MPa級ベイナイト鋼の微視組織評価 | 光量子工学研究 第5回 理研シンポジウム 平成29年 | | | 213‐214 | | 2017 |
| 20 | Texture evaluation in ductile fracture process by neutron diffraction measurement | NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B | 734 | | 032027 | | 2016 |
| 21 | Non-destructive Texture Measurement of Steel Sheets with Compact Neutron Source "RANS" | NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B | 734 | | 032047/1 | 032047/4 | 2016 |
| 22 | Evaluation of phase stresses and phase strains under deformation in TRIP steels | Photon Factory Activity Report | 29 | B | 222 | | 2013 |
| 23 | OS0104 Analysis of Crack Propagation in Stealth Dicing Using Stress Intensity Factor | | 2009 | | 73 | 74 | Jul. 24, 2009 |
| 24 | Analysis of Crack Propagation Induced by Laser Irradiation in Stealth Dicing | | CDROM | | - | | 2009 |
| 25 | Innovative laser technology for semiconductor manufacturing - stealth dicing | 3rd Pacific International Conference on Applications of Lasers and Optics, PICALO 2008 - Conference Proceedings | CDROM | | - | 684 | Dec. 1, 2008 |
| 26 | Analysis of processing mechanism in stealth dicing of ultra thin silicon wafer | LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings | - | | 861 | 866 | Dec. 1, 2007 |
| 27 | Internal Modification of Ultra Thin Silicon Wafer by Permeable Pulse Laser | | CDROM | | - | | 2007 |
| 28 | Laser processing of doped silicon wafer by the Stealth Dicing | ISSM 2007: 2007 INTERNATIONAL SYMPOSIUM ON SEMICONDUCTOR MANUFACTURING, CONFERENCE PROCEEDINGS | CDROM | | 521 | + | 2007 |
| 29 | Analysis of modified layer formation into silicon wafer by permeable nanosecond laser | ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings | CDROM | | 24 | 31 | Dec. 1, 2006 |
| 30 | 428 Internal modified layer formation mechanism into silicon with permeable nanosecond laser | The ... Manufacturing & Machine Tool Conference | 2006 | 6 | 285 | 286 | Nov. 24, 2006 |
| 31 | Advanced dicing technology for semiconductor wafer | ISSM 2006 CONFERENCE PROCEEDINGS- 13TH INTERNATIONAL SYMPOSIUM ON SEMICONDUCTOR MANUFACTURING | CDROM | | 215 | + | 2006 |
| 32 | The Mechanism of Semiconductor Wafer Dicing by Stealth Dicing Technology | | web | | 203 | | 2006 |
| 33 | OS4(5)-21(OS04W0318) Residual Stress Measurements on Cu Thin Films with Various Thicknesses Using Synchrotron Radiation | Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics | CDROM | | - | 203 | 2003 |
| 34 | Residual Stress Measurements on Cu Thin Films with Various Thicknesses Using Synchrotron Radiation | | CDROM | | - | | 2003 |
| Conference Activities & Talks |
| No. | Ｔitle | Conference | Publication date | Promoter | Venue |
| 1 | ピーニングされたステンレス鋼の微細組織 | 日本機械学会関東支部・精密工学会・茨城大学茨城講演会講演論文集 | Aug. 29, 2017 | | |
| 2 | 弾性異方性の大きい鉄合金における全体的な弾性の評価 | 材料とプロセス(CD-ROM) | Aug. 21, 2017 | | |
| 3 | 中性子線を用いた複相鋼体積分率評価―小型中性子源RANS― | 材料とプロセス(CD-ROM) | Mar. 31, 2017 | | |
| 4 | CMWP法による中性子回折プロファイル解析を用いた応力緩和中における780MPa級ベイナイト鋼の微視組織評価 | 光量子工学研究 第5回 理研シンポジウム 平成29年 | 2017 | | |
| 5 | 小型中性子源の産業利用に向けた金属組織測定技術開発 | 光量子工学研究 第5回 理研シンポジウム 平成29年 | 2017 | | |
| 6 | バルク状黒鉛のX線応力測定法の検討 | X線材料強度に関するシンポジウム講演論文集 | 2017 | | |
| 7 | 放射光を用いたラインプロファイル解析法による鉄鋼材料転位密度評価 | X線材料強度に関するシンポジウム講演論文集 | 2017 | | |
| 8 | Microscopic Lattice Strains and Magnetic Domain Structure in Magnetostrictive Fe based Alloys | Proceedings of 7th International Conference Magnetism and Metallurgy, (2016) | Jun. 13, 2016 | | |
| 9 | Texture evaluation in ductile fracture process by neutron diffraction measurement | NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B | 2016 | IOP PUBLISHING LTD | |
| 10 | Non-destructive Texture Measurement of Steel Sheets with Compact Neutron Source "RANS" | NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B | 2016 | IOP PUBLISHING LTD | |
| 11 | Characterization of dislocations of cold-drawn pearlitic steels using synchrotron X-ray diffraction | Proceedings of Asia Steel Interanational Conference 2015 | 2015 | | |
| 12 | Measurement of neutron diffraction with compact neutron source RANS | IL NUOVO CIMENTO | 2015 | | |
| 13 | X-ray line profile study on shot/laser-peened stainless steel | RESIDUAL STRESSES IX | 2014 | TRANS TECH PUBLICATIONS LTD | |
| 14 | Dislocation density measurement of carbon steel with tensile loading by x-ray diffraction | The 55th Japan congress on materials research | 2011 | | |
| 15 | Analysis of Crack Propagation Induced by Laser Irradiation in Stealth Dicing | | 2009 | | |
| 16 | Innovative laser technology for semiconductor manufacturing - stealth dicing | 3rd Pacific International Conference on Applications of Lasers and Optics, PICALO 2008 - Conference Proceedings | Dec. 1, 2008 | | |
| 17 | Analysis of processing mechanism in stealth dicing of ultra thin silicon wafer | LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings | Dec. 1, 2007 | | |
| 18 | Internal Modification of Ultra Thin Silicon Wafer by Permeable Pulse Laser | | 2007 | | |
| 19 | Laser processing of doped silicon wafer by the Stealth Dicing | ISSM 2007: 2007 INTERNATIONAL SYMPOSIUM ON SEMICONDUCTOR MANUFACTURING, CONFERENCE PROCEEDINGS | 2007 | IEEE | |
| 20 | Analysis of modified layer formation into silicon wafer by permeable nanosecond laser | ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings | Dec. 1, 2006 | | |
| 21 | Advanced dicing technology for semiconductor wafer | ISSM 2006 CONFERENCE PROCEEDINGS- 13TH INTERNATIONAL SYMPOSIUM ON SEMICONDUCTOR MANUFACTURING | 2006 | SEMICONDUCTOR PORTAL INC | |
| Research Grants & Projects |
| No. | Offer organization | System name | Title | Fund classification | Date |
| 1 | Japan Society for the Promotion of Science | Grants-in-Aid for Scientific Research | Multidimensional Analysis of Forced and Damped Motion Response of Functional Alloy Iron for Vibration Control | | Apr. 2022 - Mar. 2025 |
| 2 | Japan Society for the Promotion of Science | Grants-in-Aid for Scientific Research Grant-in-Aid for Early-Career Scientists | Development of fatigue damage evaluation in the early stage using X-ray diffraction | | Apr. 2019 - Mar. 2022 |
| 3 | Japan Society for the Promotion of Science | Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B) | Characterization of microscopic multiple strain in iron based alloys with large elastic anisotropy | | Apr. 2017 - Mar. 2021 |
| 4 | Japan Society for the Promotion of Science | Grants-in-Aid for Scientific Research | Development of neutron hybrid diffraction method aiming for measurement of residual stress in bulk metals | | Apr. 2017 - Mar. 2020 |
| 5 | Japan Society for the Promotion of Science | Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B) | Development of X-ray stress measurement technique to achieve accurate evaluation for strength of polygranular graphite | | Apr. 2016 - Mar. 2018 |
