| Published Papers |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date | DOI | Referee |
| 1 | Study of Structure for Transverse Flux Type Flux Reversal Linear Motor  | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 29 | 2 | 263 | 268 | 2021 | https://doi.org/10.14243/jsaem.29.2631 | Not refereed |
| 2 | Comparison of torque ripple due to difference of embedded form of magnets | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 27 | 1 | 8 | 12 | 2019 | https://doi.org/10.14243/jsaem.27.81 | |
| 3 | Study of Proposals and Torque Vibration Reduction Structure of the 16-pole 18-slot IPM Motor for Mild Hybrid | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 27 | 3 | 335 | 340 | 2019 | https://doi.org/10.14243/jsaem.27.3351 | Not refereed |
| 4 | Study of Proposals and Torque Vibration Reduction Structure of the 16-pole 18-slot IPM Motor for Mild Hybrid | 日本AEM学会誌 | 27 | 3 | | | 2019 | | |
| 5 | The Study on Control Method of Steer-By-Wire with Torque Estimation and Speed Compensation | ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems | | | 2808 | 2811 | Nov. 27, 2018 | https://doi.org/10.23919/ICEMS.2018.85494921 | |
| 6 | Research of Improvement of Path Follow-Up Performance of Robot | ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems | | | 2797 | 2802 | Nov. 27, 2018 | https://doi.org/10.23919/ICEMS.2018.85494681 | |
| 7 | Study of small-capacity wind power generation system with using Doubly-Fed induction machine. | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 26 | 1 | 53 | 58 | 2018 | https://doi.org/10.14243/jsaem.26.531 | Not refereed |
| 8 | The Study of Parallel Synchronous Operation in Permanent Linear Synchronous Motor | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 26 | 1 | 65 | 70 | 2018 | https://doi.org/10.14243/jsaem.26.651 | Not refereed |
| 9 | The study of parallel synchronous drive in Permanent magnet linear synchronous motor | LDIA 2017 - 11th International Symposium on Linear Drives for Industry Applications | | | | | Nov. 3, 2017 | https://doi.org/10.23919/LDIA.2017.80972631 | |
| 10 | A study on efficiency of firing angle change of switched reluctance motor | 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017 | | | | | Oct. 2, 2017 | https://doi.org/10.1109/ICEMS.2017.80564541 | |
| 11 | Study of parameter variations compensation in sensorless control of PMSM | 19th International Conference on Electrical Machines and Systems, ICEMS 2016 | | | | | Jan. 30, 2017 | | |
| 12 | The effect of armature offset for the reduction of end cogging force | International Journal of Applied Electromagnetics and Mechanics | 50 | 4 | 637 | 645 | Mar. 28, 2016 | https://doi.org/10.3233/JAE-1501521 | |
| 13 | The efficiency comparison by exciting waveform of the square-wave brushless DC motor | 2015 18th International Conference on Electrical Machines and Systems, ICEMS 2015 | | | 1407 | 1413 | Jan. 18, 2016 | https://doi.org/10.1109/ICEMS.2015.73852591 | |
| 14 | Proposing of high thrust double-sided PM-LSM with magnetic configuration | 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014 | | | 1779 | 1780 | 2014 | https://doi.org/10.1109/ICEMS.2014.70137691 | Refereed |
| 15 | Velocity Ripple Suppression using Constant Load Angle Control of the Discontinuous Armature PM-LSM | IEEJ Transactions on Industry Applications | 126 | 12 | 1616 | 1622 | 2006 | https://doi.org/10.1541/ieejias.126.16161 | Not refereed |
| MISC |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date |
| 1 | Visit the University Museum!—Visit the Tokyo Tech Museum and Archives | The Journal of The Institute of Electrical Engineers of Japan | 144 | 4 | 185 | 188 | Apr. 1, 2024 |
| 2 | Development of a Cathode Torch Moving Method Using Point Cloud Data for Automatic Arc Welding | 電気学会研究会資料(Web) | | EPP-23-060-073/SA-23-044-057/SP-23-012-025 | | | 2023 |
| 3 | Development of Automated TIG Arc Welding Method Using AI to Prevent Weld Defects | 電気学会研究会資料(Web) | | EPP-23-060-073/SA-23-044-057/SP-23-012-025 | | | 2023 |
| 4 | Study of comparative characteristics of TF-FRLMs for transport | 電気学会研究会資料(Web) | | MAG-23-031-056/LD-23-035-60 | | | 2023 |
| 5 | Temperature Measurement near Vacuum Arc Cathode Spot Using Spectroscopy as Affected by Application of Transverse Magnetic Field in Vacuum Arc | 電気学会研究会資料(Web) | | EPP-23-060-073/SA-23-044-057/SP-23-012-025 | | | 2023 |
| 6 | Contribution of Slope to Bead Width for Automatic Arc Welding | 電気学会研究会資料(Web) | | EPP-23-060-073/SA-23-044-057/SP-23-012-025 | | | 2023 |
| 7 | Proposal of Control Method of Z Source Inverter for Driving Switched Reluctance Motor | 電磁力関連のダイナミクスシンポジウム講演論文集 | 35th (CD-ROM) | | | | 2023 |
| 8 | Method of reducing induced voltage of IPMSM using centrifugal force | MAGDAコンファレンス講演論文集 | 31st (CD-ROM) | | | | 2022 |
| 9 | Analyzed of improvement SynRM performance in rotor geometry | MAGDAコンファレンス講演論文集 | 31st (CD-ROM) | | | | 2022 |
| 10 | Study on simulation environment for development of steer-by-wire control system | MAGDAコンファレンス講演論文集 | 31st (CD-ROM) | | | | 2022 |
| 11 | Study of Hybrid system for electric vehicles with EDLC and lithium-ion battery | MAGDAコンファレンス講演論文集 | 31st (CD-ROM) | | | | 2022 |
| 12 | Study on Improvement of PMSM Operation Performance Based on V/f Control | MAGDAコンファレンス講演論文集 | 31st (CD-ROM) | | | | 2022 |
| 13 | Z-Source Inverter Control Method for Efficiency Improvement of Switched Reluctance Motors | MAGDAコンファレンス講演論文集 | 31st (CD-ROM) | | | | 2022 |
| 14 | Study of Structure for Transverse Flux Type Flux Reversal Linear Motor | 日本AEM学会誌 | 29 | 2 | | | 2021 |
| 15 | A Study of Improving Torque Conversion Efficiency of Magnetic Gears | MAGDAコンファレンス講演論文集 | 30th (CD-ROM) | | | | 2021 |
| 16 | A Study of the Geometry of a Double-Sided Transverse Flux-Flux Reversal Linear Motor | MAGDAコンファレンス講演論文集 | 30th (CD-ROM) | | | | 2021 |
| 17 | Horizontal parallel link robot composed of direct motors Examination of continuous trajectory tracking control | MAGDAコンファレンス講演論文集 | 30th (CD-ROM) | | | | 2021 |
| 18 | Contribution to Bead Width Affected by Applied Axial Magnetic Field to Arc for Welding Speed Improvement | 電気学会全国大会講演論文集(CD-ROM) | 2021 | | | | 2021 |
| 19 | Movement Velocity of Vacuum Arc Cathode Spot with 180 Degree Changing of Magnetic Field Direction | 電気学会全国大会講演論文集(CD-ROM) | 2021 | | | | 2021 |
| 20 | Proposal of Variable Power Supply Applicable to Variable Speed Drive of SRM | MAGDAコンファレンス講演論文集 | 29th (CD-ROM) | | | | 2020 |
| 21 | Trajectory of Vacuum Arc Cathode Spot with Transverse Magnetic Field and Alternating Magnetic Field Applied | 電気学会基礎・材料・共通部門大会講演論文集(CD-ROM) | 2020 | | | | 2020 |
| 22 | Analysis of Arc Temperature Distribution Affected by Angle of External Magnetic Field | 電気学会基礎・材料・共通部門大会講演論文集(CD-ROM) | 2020 | | | | 2020 |
| 23 | Consideration of Parameter in Direct Torque Control of Permanent Magnet Assisted Synchronous Reluctance Motor | MAGDAコンファレンス講演論文集 | 29th (CD-ROM) | | | | 2020 |
| 24 | Study of Initial Rotor Position Estimation and Low-Speed Sensorless Control for SynRM using Saliency | MAGDAコンファレンス講演論文集 | 29th (CD-ROM) | | | | 2020 |
| 25 | Proposal of a novel transfer device using a linear motor in parallel synchronous operation | 2019 12th International Symposium on Linear Drives for Industry Applications, LDIA 2019 | | LD-19-014-027 | 71‐75 | | Jul. 2019 |
| 26 | Comparison of IPMSM Characteristics by Slot/Pole ratio | MAGDAコンファレンス講演論文集 | 28th | | 294‐297 | | 2019 |
| 27 | Proposal of Variable Power Supply Applicable to Variable Speed Drive of SRM | MAGDAコンファレンス講演論文集 | 28th | | 290‐293 | | 2019 |
| 28 | Proposal of servo control method for Switched Reluctance Motor | MAGDAコンファレンス講演論文集 | 28th | | 286‐289 | | 2019 |
| 29 | Proposal of inverter-saving method in permanent magnet linear synchronous motor | MAGDAコンファレンス講演論文集 | 28th | | 322‐327 | | 2019 |
| 30 | The study on control method of Steer-By-Wire system with instantaneous speed observer and disturbance torque observer | MAGDAコンファレンス講演論文集 | 27th | | | | 2018 |
| 31 | The study of driving inverter on switched reluctance motor | MAGDAコンファレンス講演論文集 | 27th | | | | 2018 |
| 32 | Comparison of drone motor characteristics | MAGDAコンファレンス講演論文集 | 27th | | | | 2018 |
| 33 | Investigation on cause of vibration of stepping motor | MAGDAコンファレンス講演論文集 | 27th | | 370‐373 | | 2018 |
| 34 | A Study on Driving Method of Electrolytic Capacitorless Inverter Using Bridgeless Circuit | MAGDAコンファレンス講演論文集 | 27th | | 342‐345 | | 2018 |
| 35 | Investigation of influence of intertial force of variable speed operation to improve position control of 2 link arms | MAGDAコンファレンス講演論文集 | 27th | | 346‐351 | | 2018 |
| 36 | Study on regenerative control for electric cart | MAGDAコンファレンス講演論文集 | 27th | | 338‐341 | | 2018 |
| 37 | Study on torque ripple compensation method by driving current on PM motor | MAGDAコンファレンス講演論文集 | 26th | | | | 2017 |
| 38 | Study on Nonlinear Friction Compensation in Ball Screw Drive System | MAGDAコンファレンス講演論文集 | 26th | | | | 2017 |
| 39 | The study of parallel synchronous operation of PM-LSM for transportation system | 電気学会マグネティックス研究会資料 | MAG-16 | 38-52 | | | 2016 |
| 40 | Yamanote Line New Commuter Train E235 Series | The Journal of The Institute of Electrical Engineers of Japan | 136 | 5 | 307 | 310 | 2016 |
| 41 | Improvement of loss and vibration noise characteristics depending on excitation waveform of a brushless DC motor | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 24 | 3 | 210 | 215 | 2016 |
| 42 | Parallel Synchronous Drive Method for Transportation System Using PM-LSM | 電気学会リニアドライブ研究会資料 | LD-15 | 1-17 | | | 2015 |
| 43 | Rapid Charge Type Buttery Propulsion Ship “Raicho” | 電気学会誌 | 135 | 4 | 237 | 240 | 2015 |
| 44 | Comparison of efficiencies depending on excitation angle of a square-wave brushless DC motor | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 23 | 2 | 276 | 281 | 2015 |
| 45 | Verification of Parallel Synchronous Drive Method of Permanent Magnet Linear Synchronous Motor | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 23 | 2 | 344 | 349 | 2015 |
| 46 | Efficiency Comparison of the Switched Reluctance Motor due to the difference in the electromagnetic material | 2014 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM) | CDROM | | 417 | 420 | 2014 |
| 47 | What Time is It of Father’s Transit Time at the 30 kms ? -Time Management Techniques using IC Tag- | 電気学会誌 | 134 | 1 | 4 | 7 | 2014 |
| 48 | Examination of the Stability of Sensorless Control of Permanent Magnet Synchronous Motor in the case of fluctuating load | 2014 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM) | CDROM | | 1180 | 1183 | 2014 |
| 49 | Performance comparison of torque and efficiency of SRM based on structure of slot | | APSAEM2014 | | | | 2014 |
| 50 | Study of Parallel Synchronous Drive Method of Permanent Magnet Linear Synchronous Motor | | APSAEM2014 | | | | 2014 |
| 51 | Examination of the stability of sensorless control of permanent magnet synchronous motor in the case of fluctuating load | 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2014 | CDROM | | 1180 | 1183 | 2014 |
| 52 | Efficiency comparison of the switched reluctance motor due to the difference in the electromagnetic material | 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2014 | CDROM | | 417 | 420 | 2014 |
| 53 | Trend of an Autonomous Driving Control Vehicle:—Initiatives of Energy ITS Project— | The Journal of The Institute of Electrical Engineers of Japan | 133 | 9 | 595 | 598 | 2013 |
| 54 | Preparation of the Velocity Ripple Suppression for Intermittent Stator Permanent Magnet Linear Synchronous Motor | Journal of the Japan Society of Applied Electromagnetics and Mechanics | 21 | 2 | 266 | 271 | 2013 |
| 55 | Study of Intermittent Stator PM-LSM control method by a position detector using hall element | 2013 International Conference on Electrical Machines and Systems, ICEMS 2013 | CDROM | | 1981 | 1984 | 2013 |
| 56 | Preparation of the Velocity Ripple Suppression for Intermittent Stator Permanent Magnet Linear Synchronous Motor | 日本AEM学会誌 | 21 | 2 | 266 | 271 | 2013 |
| 57 | Proposition of the long-distance conveyance system using the Intermittent Stator Permanent Magnet Linear Synchronization Motor | | CDROM | | | | 2013 |
| 58 | Study of Intermittent Stator PM-LSM control method by a position detector using hall element | 2013 International Conference on Electrical Machines and Systems, ICEMS 2013 | CDROM | | 1981 | 1984 | 2013 |
| 59 | Proposition of the transport system using the Intermittent Stator Permanent Magnet Linear Synchronization Motor | 電気学会リニアドライブ研究会資料 | 2012 | 66 | 67 | 70 | Nov. 15, 2012 |
| 60 | Study of Thrust Ripple Suppression Using Interpoles of Intermittent Stator Permanent Magnet Linear Synchronous Motor | IEEJ Transactions on Industry Applications | 132 | 6 | 625 | 630 | Jun. 1, 2012 |
| 61 | Driving Method of Permanent-Magnet Linear Synchronous Motor With the Stationary Discontinuous Armature for Long-Distance Transportation System | IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS | 59 | 5 | 2227 | 2235 | May. 2012 |
| 62 | Experimental Verification of the Dynamics Estimation using Disturbance Observer of the Intermittent Stator PM-LSM | 電気学会リニアドライブ研究会資料 | LD-12 | 66-82 | 71 | 75 | 2012 |
| 63 | Development of the change circuit of the inverter of Intermittent Stator PM-LSM | 2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012) | CDROM | | | | 2012 |
| 64 | Development of the change circuit of the inverter of intermittent stator PM-LSM | ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems | CDROM | | | | 2012 |
| 65 | Optimal Design for 4 Pole 3 Slot Structure of the Intermittent Stator Permanent Magnet Type Linear Synchronous Motor | 電気学会リニアドライブ研究会資料 | 2011 | 10 | 53 | 58 | Feb. 16, 2011 |
| 66 | Study of the Velocity Ripple Suppression for Intermittent Stator Permanent Magnet Linear Synchronous Motor | | CDROM | | | | 2011 |
| 67 | Optimal Design for 4 Pole 3 Slot Structure of the Intermittent Stator Permanent Magnet Type Linear Synchronous Motor | | CDROM | | | | 2011 |
| 68 | Experimental verification of Discontinuous Stator PM-LSM Driving Method by a Position detector using Hall element | 電気学会回転機研究会資料 | 2010 | 70 | 47 | 52 | Aug. 5, 2010 |
| 69 | Study of Thrust Ripple Suppression using Interpoles of Discontinuous Stator Permanent Magnet Linear Synchronous Motor | 電気学会回転機研究会資料 | 2010 | 70 | 41 | 46 | Aug. 5, 2010 |
| 70 | 推力外乱オブザーバを用いた固定子間欠配置永久磁石リニア同期モータの駆動法に関する検討 | | 18 | 2 | 104 | 109 | Jun. 2010 |
| 71 | Outlet Edge Effect of the Discontinuous Stator Permanent Magnet Linear Synchronous Motor | 電気学会リニアドライブ研究会資料 | 2010 | 1 | 1 | 6 | Mar. 14, 2010 |
| 72 | Velocity Ripple Suppression by Thrust Disturbance Observer of the Discontinuous Stator Permanent Magnet Linear Synchronous Motor | 電気学会リニアドライブ研究会資料 | 2010 | 1 | 19 | 24 | Mar. 14, 2010 |
| 73 | Pole Position Detecting Method Using Hall Element of the Discontinuous Stator PM-LSM | 電気学会リニアドライブ研究会資料 | 2010 | 1 | 13 | 17 | Mar. 14, 2010 |
| 74 | Development of ironless type surface motor | 19th International Conference on Electrical Machines, ICEM 2010 | CDROM | | | | 2010 |
| 75 | A position detecting method using hall element for discontinuous stator permanent magnet linear synchronous motor | 19th International Conference on Electrical Machines, ICEM 2010 | CDROM | | | | 2010 |
| 76 | Development of ironless type surface motor | 19th International Conference on Electrical Machines, ICEM 2010 | CDROM | | | | 2010 |
| 77 | A position detecting method using hall element for discontinuous stator permanent magnet linear synchronous motor | 19th International Conference on Electrical Machines, ICEM 2010 | CDROM | | | | 2010 |
| 78 | 長距離搬送を目的とした固定子間欠配置永久磁石リニア同期モータの駆動法に関する検討 | | 17 | 2 | 317 | 323 | Jun. 2009 |
| 79 | Proposal of the Long-distance Transportation System in the Factory Using PM-LSM | 2009 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-3 | CDROM | | 360 | + | 2009 |
| 80 | Study of the Thrust Disturbance Suppression Method of the Discontinuous Stator Permanent Magnet Type Linear Synchronous Motor | | CDROM | | | | 2009 |
| 81 | Proposal of the Air-core-coil Type PM-LSM by Air Levitation and Discontinuous Armature Arrangement | | CDROM | | 84 | 85 | 2009 |
| 82 | Proposal of the long-distance transportation system in the factory using PM-LSM | Proceedings - The 12th International Conference on Electrical Machines and Systems, ICEMS 2009 | CDROM | | 360 | + | 2009 |
| 83 | Proposal of the section change method of the stator block of the discontinuous stator permanent magnet type linear synchronous motor aimed at long-distance transportation | Proceedings of the 2008 International Conference on Electrical Machines, ICEM'08 | CDROM | | | | 2008 |
| 84 | Examination about high precision positioning of slotless PM-LSM by air flotation and discontinuous armature arrangement | 電気学会リニアドライブ研究会資料 | LD-08 | 66-75 | 1 | 4 | 2008 |
| 85 | Study of the Static Force by the Difference in the Winding Structure of Permanent Magnet Type Linear Synchronous Motor | | CDROM | | | | 2008 |
| 86 | Proposal of the section change method of the stator block of the discontinuous stator permanent magnet type linear synchronous motor aimed at long-distance transportation | Proceedings of the 2008 International Conference on Electrical Machines, ICEM'08 | CDROM | | | | 2008 |
| 87 | Proposal of the Air-core Type Linear Synchronous Motor Using the Air Levitation System | | CDROM | | | | 2008 |
| 88 | Modeling about the Discontinuous Armature Arrangement Interval of the Permanent Magnet Type Linear Synchronous Motor | 電気学会リニアドライブ研究会資料 | LD-07 | 32-49 | 17 | 22 | 2007 |
| 89 | Modeling about the discontinuous armature arrangement interval of the permanent magnet type linear synchronous motor | Proceeding of International Conference on Electrical Machines and Systems, ICEMS 2007 | CDROM | | 588 | 593 | 2007 |
| 90 | Modeling about the discontinuous armature arrangement interval of the permanent magnet type linear synchronous motor | 2007 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-4 | CDROM | | 475 | 480 | 2007 |
| 91 | Experimental Verification of the Discontinuous Primary Permanent Magnet Linear Synchronous Motor using Velocity Feedback Control | 電気学会リニアドライブ研究会資料 | LD-06 | 16-25 | 29 | 33 | 2006 |
| 92 | Control Strategy for The Discontinuous Primary Permanent Magnet Linear Synchronous Motor Considering Thrust Constant Change | The 2006 International Conference on Electrical Machines and Systems (ICEMS2006), November 21 | CDROM | | | | 2006 |
| 93 | Control Strategy for The Discontinuous Primary Permanent Magnet Linear Synchronous Motor Considering Thrust Constant Change | | CDROM | | | | 2006 |
| 94 | Development of the Discontinuous Primary Permanent Magnet Linear synchronous Motor | | CDROM | | | | 2006 |
