| Published Papers |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date | DOI | Referee |
| 1 | Study on machining characteristics of titanium alloys in scanning ECM with electrolyte suction tool | Proceedings of 19th International Conference on Precision Engineering | | | | | 2022 | | Refereed |
| 2 | Local copper precipitation with ultrashort-pulsed laser ablation in copper sulfate solution | Proceedings of 19th International Conference on Precision Engineering | | | | | 2022 | | Refereed |
| 3 | Effect of permeable mold and recovery of air-permeability of porous insert by electrochemical machining | Proceedings of 18th International Symposium on Electrochemical Machining Technology 2022 (INSECT 2022) | | | | | 2022 | | Refereed |
| 4 | Fabrication of nanostructure and deposition of metal particles by femtosecond laser ablation in electrolyte | Procedia CIRP | 113 | | 439 | 444 | 2022 | https://doi.org/10.1016/j.procir.2022.09.1971 | Refereed |
| 5 | Cu microprecipitation with electrolysis assisted short-pulsed laser irradiation in CuSO4 solution | Proceedings of 18th International Symposium on Electrochemical Machining Technology 2022 (INSECT 2022) | | | | | 2022 | | Refereed |
| 6 | Effect of tip shape of pipe electrode on accuracy in electrochemical machining of deep cooling holes | Proceedings of 19th International Conference on Precision Engineering | | | | | 2022 | | Refereed |
| 7 | Picosecond laser-induced nanopillar coverage of entire mirror-polished surfaces of Ti6Al4V alloy | Precision Engineering | 72 | | 556 | 567 | Nov. 2021 | https://doi.org/10.1016/j.precisioneng.2021.07.0041 | Refereed |
| 8 | Effects of electrolyte on laser-induced periodic surface structures with picosecond laser pulses  | Nanomaterials | 11 | 2 | 327 | 327 | 2021 | https://doi.org/10.3390/nano110203271 | Refereed |
| 9 | Control of Straight Laser Induced Periodic Surface Structures on Aluminium alloy by Ultraprecision Cutting | Proceedings of 21st International Conference and Exhibition | | | | | 2021 | | Refereed |
| 10 | Effects of electrolytes on fine structures fabricated by hybrid process with shortpulsed laser and electrochemical machining | Proceedings of 21st International Conference and Exhibition | | | | | 2021 | | Refereed |
| 11 | Influence of frequency and pulse duration on fabrication of periodic nanostructure by ultrashort-pulsed laser | Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) | | | | | 2021 | | Refereed |
| 12 | Investigation of surface characteristics of porous materials processed with electrochemical machining | Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) | | | | | 2021 | | Refereed |
| 13 | Characteristics of electrochemical machining by using electrolyte suction tool with auxiliary anode | Proceedings of 21st International Conference and Exhibition | | | | | 2021 | | Refereed |
| 14 | Characteristic investigation of electrochemical machining using quasi-solid electrolyte | Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) | | | | | 2021 | | Refereed |
| 15 | Simulation of edge-sagging phenomenon in electrochemical machining of cooling holes | Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) | | | | | 2020 | | Refereed |
| 16 | Control of laser-induced periodic surface structures assisted by mechanical processing | JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020 | | | | | 2020 | https://doi.org/10.1115/LEMP2020-85421 | Refereed |
| 17 | Fabrication of multiscale structure by hybrid process with short-pulsed laser and electrochemical machining | Procedia CIRP | 95 | | 875 | 878 | 2020 | https://doi.org/10.1016/j.procir.2020.01.1741 | Refereed |
| 18 | Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser | International Journal of Automation Technology | 14 | 4 | 601 | 613 | 2020 | https://doi.org/10.20965/ijat.2020.p06011 | Refereed |
| 19 | Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures | International Journal of Automation Technology | 14 | 4 | 552 | 559 | 2020 | https://doi.org/10.20965/ijat.2020.p05521 | Refereed |
| 20 | Control of short-pulsed laser induced periodic surface structures with machining -picosecond laser nanotexturing with magnetic abrasive finishing- | Precision Engineering | 60 | | 428 | 436 | 2019 | https://doi.org/10.1016/j.precisioneng.2019.06.0151 | Refereed |
| 21 | Study on improvement of transfer accuracy in ECM of fine taper hole | Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) | | | | | 2019 | | Refereed |
| 22 | Control of short-pulsed laser induced periodic surface structures with machining - Picosecond laser micro/nanotexturing with ultraprecision cutting | Precision Engineering | 55 | | 433 | 438 | 2019 | https://doi.org/10.1016/j.precisioneng.2018.10.0131 | Refereed |
| 23 | Effect of Crystal Structure on Fabrication of Fine Periodic Surface Structures with Short Pulsed Laser | International Journal of Automation Technology | 12 | 6 | 868 | 875 | 2018 | https://doi.org/10.20965/ijat.2018.p08681 | Refereed |
| 24 | The effect of crystal structure on fabrication of fine periodic surface structures with short pulsed laser | ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology | | | 1051 | 1056 | 2017 | | Refereed |
| 25 | Explication for femtosecond-laser-induced nanostrucuring on glass surface | Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering | 82 | 5 | | | 2016 | https://doi.org/10.2493/jjspe.82.4431 | |
| 26 | Fabrication and control of fine periodic surface structures by short pulsed laser | International Journal of Automation Technology | 10 | 4 | 639 | 646 | 2016 | https://doi.org/10.20965/ijat.2016.p06391 | Refereed |
| 27 | Femtosecond-laser-induced nanofabrication on glass | Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering | 81 | 9 | 862 | 866 | Sep. 5, 2015 | https://doi.org/10.2493/jjspe.81.8621 | Refereed |
| 28 | 1205 Fabrication and control of fine periodic surface structures by short pulsed laser | Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 | 2015 | 0 | _1205 | 1_-_1205-5_ | 2015 | https://doi.org/10.1299/jsmelem.2015.8._1205-1_1 | Refereed |
| MISC |
| No. | Ｔitle | Journal | Vol | No | Start Page | End Page | Publication date |
| 1 | Multi-Scale Texturing and Surface Modification by Hybrid Ultrashort-Pulsed Laser Processing | JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS | 68 | 1 | 15 | 20 | 2023 |
| 2 | Seiko Holdings Corporation | Journal of the Japan Society for Precision Engineering | 88 | 4 | 336 | 337 | Apr. 5, 2022 |
| 3 | Characteristics of ECM of difficult-to-cut materials by using electrolyte suction tool with auxiliary anode | Proceedings of 7th Symposium on International Collaboration on Micro and Precision Electrical Machining | | | | | 2022 |
| 4 | Fabrication of fine periodic structure and deposition of metal particles by femtosecond laser irradiation in electrolyte. | Proceedings of JSPE Semestrial Meeting | 2021A | | 178 | 179 | Sep. 8, 2021 |
| 5 | Research on machining sustainability of liquid region limited ECM with electrolyte absorption mechanism | Proceedings of JSPE Semestrial Meeting | 2021A | | 508 | 509 | Sep. 8, 2021 |
| 6 | Effect of electrolyte concentration on metal particle deposition by femtosecond laser | Proceedings of 7th Symposium on International Collaboration on Micro and Precision Electrical Machining | | | | | 2020 |
| 7 | Fabricating Hybrid Structure by Short-Pulsed Laser with ECM | 精密工学会大会学術講演会講演論文集 | 2020 | 0 | 409 | 410 | 2020 |
| 8 | Effects of pulse duration and electrolyte on hybrid process with short-pulsed laser and ECM | 精密工学会大会学術講演会講演論文集 | 2020 | | 196 | 197 | 2020 |
| 9 | Development of High Functional Cutting Tool with Nanostructure Fabricated by Short Pulse Laser | The Proceedings of Mechanical Engineering Congress, Japan | 2018 | 0 | S1320206 | | 2018 |
| Conference Activities & Talks |
| No. | Ｔitle | Conference | Publication date | Promoter | Venue |
| 1 | Nanostructure generation and metal deposition by short-pulsed laser ablation in electrolyte | The 6th International Symposium on Micro/Nano Mechanical Machining and Manufacturing | 2021 | | |
| 2 | Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures | International Conference on Laser Materials Processing 2021 | 2020 | | |
| 3 | Fabrication of micro/nano structures by hybrid process with short-pulsed laser and machining | International Congress on Laser Advanced Materials Processing 2020 | 2019 | | |
| 4 | Effect of Crystal Orientation on Short Pulsed Laser-Induced Periodic Surface Structure | The 5th International Symposium on Micro/Nano Mechanical Machining and Manufacturing (ISMNM 2018) | 2018 | | |
| 5 | Control of Laser-Induced Periodic Surface Structures with Mechanical Processing | The China-Japan High-level Experts Symposiums on Intelligent Manufacturing | 2018 | | |
| 6 | Fabrication and control of fine periodic surface structures by short pulsed laser | JSPS-DST Asian Academic Seminar 2016 | 2015 | | |
| 7 | Materials effects on fine periodic surfaces structures fabricated by short pulsed laser | Joint Symposium on the MSE for the 21st Century | 2014 | | |
